{"title":"C4 Fabrication","description":"","products":[{"product_id":"4runner-overland-series-front-bumper-6th-gen-2025-2026-no-bar-raw","title":"4Runner Overland Series Front Bumper \/ 6th Gen \/ 2025-2026 \/ No Bar \/ RAW","description":"\u003cp\u003eThe C4 Fabrication Overland Series Front Bumper for the 2025+ Toyota 4Runner is built for full front-end protection, recovery capability, and clean integration with modern vehicle systems. Designed specifically for the 6th Gen platform, this bumper delivers high-clearance performance while maintaining compatibility with Toyota Safety Sense and factory parking sensors when equipped.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from 3\/16 inch laser cut P\u0026amp;O steel, the bumper is built to handle aggressive off-road use without compromising structural integrity. The integrated 3\/4 inch D-ring mounts are welded front and back for maximum strength in recovery situations. An optional 1 3\/4 inch OD tubular bull bar system adds additional protection and rigidity, while maintaining proper sensor function across all variants. You can opt for no bull bar, a full height bar, or a full height bar with headlight hoops for maximum front end coverage.\u003c\/p\u003e\n\n\u003cp\u003eThis bumper is engineered for serious overland setups with built-in winch capability. It includes a washer tank skid and a winch controller relocation kit to streamline installation and protect key components. Front-facing cutouts allow easy access to the winch lever, making operation simple in recovery situations. The design supports most non-integrated control box winches, with confirmed fitment for Warn Zeon XD and Evo series models. Synthetic rope winches with a hawse fairlead are recommended for optimal performance.\u003c\/p\u003e\n\n\u003cp\u003eLighting capability is centered around a dedicated 40 inch light bar mount designed for Baja Designs S8 or Rigid SR Series bars. Integrated fog light pockets are built specifically for Baja Designs Squadron lights, giving you a clean and functional lighting upgrade. Factory fog lights are not supported.\u003c\/p\u003e\n\n\u003cp\u003eFinished in a durable 2-stage hammer black powder coat, the bumper is built to withstand harsh environments while maintaining a refined appearance. Installation requires trimming of the factory plastic bumper and is best completed with two people. Some vehicles may require professional recalibration of the TSS system after installation.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432723575015,"sku":"1125-31000","price":1949.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-overland-series-front-bumper-6th-gen-2025-2026-no-bar-powder-coated","title":"4Runner Overland Series Front Bumper \/ 6th Gen \/ 2025-2026 \/ No Bar \/ Powder Coated","description":"\u003cp\u003eThe C4 Fabrication Overland Series Front Bumper for the 2025+ Toyota 4Runner is built for full front-end protection, recovery capability, and clean integration with modern vehicle systems. Designed specifically for the 6th Gen platform, this bumper delivers high-clearance performance while maintaining compatibility with Toyota Safety Sense and factory parking sensors when equipped.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from 3\/16 inch laser cut P\u0026amp;O steel, the bumper is built to handle aggressive off-road use without compromising structural integrity. The integrated 3\/4 inch D-ring mounts are welded front and back for maximum strength in recovery situations. An optional 1 3\/4 inch OD tubular bull bar system adds additional protection and rigidity, while maintaining proper sensor function across all variants. You can opt for no bull bar, a full height bar, or a full height bar with headlight hoops for maximum front end coverage.\u003c\/p\u003e\n\n\u003cp\u003eThis bumper is engineered for serious overland setups with built-in winch capability. It includes a washer tank skid and a winch controller relocation kit to streamline installation and protect key components. Front-facing cutouts allow easy access to the winch lever, making operation simple in recovery situations. The design supports most non-integrated control box winches, with confirmed fitment for Warn Zeon XD and Evo series models. Synthetic rope winches with a hawse fairlead are recommended for optimal performance.\u003c\/p\u003e\n\n\u003cp\u003eLighting capability is centered around a dedicated 40 inch light bar mount designed for Baja Designs S8 or Rigid SR Series bars. Integrated fog light pockets are built specifically for Baja Designs Squadron lights, giving you a clean and functional lighting upgrade. Factory fog lights are not supported.\u003c\/p\u003e\n\n\u003cp\u003eFinished in a durable 2-stage hammer black powder coat, the bumper is built to withstand harsh environments while maintaining a refined appearance. Installation requires trimming of the factory plastic bumper and is best completed with two people. Some vehicles may require professional recalibration of the TSS system after installation.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432723607783,"sku":"1125-31000-01NA","price":2149.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-overland-series-front-bumper-6th-gen-2025-2026-high-bar-raw","title":"4Runner Overland Series Front Bumper \/ 6th Gen \/ 2025-2026 \/ High Bar \/ RAW","description":"\u003cp\u003eThe C4 Fabrication Overland Series Front Bumper for the 2025+ Toyota 4Runner is built for full front-end protection, recovery capability, and clean integration with modern vehicle systems. Designed specifically for the 6th Gen platform, this bumper delivers high-clearance performance while maintaining compatibility with Toyota Safety Sense and factory parking sensors when equipped.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from 3\/16 inch laser cut P\u0026amp;O steel, the bumper is built to handle aggressive off-road use without compromising structural integrity. The integrated 3\/4 inch D-ring mounts are welded front and back for maximum strength in recovery situations. An optional 1 3\/4 inch OD tubular bull bar system adds additional protection and rigidity, while maintaining proper sensor function across all variants. You can opt for no bull bar, a full height bar, or a full height bar with headlight hoops for maximum front end coverage.\u003c\/p\u003e\n\n\u003cp\u003eThis bumper is engineered for serious overland setups with built-in winch capability. It includes a washer tank skid and a winch controller relocation kit to streamline installation and protect key components. Front-facing cutouts allow easy access to the winch lever, making operation simple in recovery situations. The design supports most non-integrated control box winches, with confirmed fitment for Warn Zeon XD and Evo series models. Synthetic rope winches with a hawse fairlead are recommended for optimal performance.\u003c\/p\u003e\n\n\u003cp\u003eLighting capability is centered around a dedicated 40 inch light bar mount designed for Baja Designs S8 or Rigid SR Series bars. Integrated fog light pockets are built specifically for Baja Designs Squadron lights, giving you a clean and functional lighting upgrade. Factory fog lights are not supported.\u003c\/p\u003e\n\n\u003cp\u003eFinished in a durable 2-stage hammer black powder coat, the bumper is built to withstand harsh environments while maintaining a refined appearance. Installation requires trimming of the factory plastic bumper and is best completed with two people. Some vehicles may require professional recalibration of the TSS system after installation.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432723640551,"sku":"1125-31300","price":2099.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-overland-series-front-bumper-6th-gen-2025-2026-high-bar-powder-coated","title":"4Runner Overland Series Front Bumper \/ 6th Gen \/ 2025-2026 \/ High Bar \/ Powder Coated","description":"\u003cp\u003eThe C4 Fabrication Overland Series Front Bumper for the 2025+ Toyota 4Runner is built for full front-end protection, recovery capability, and clean integration with modern vehicle systems. Designed specifically for the 6th Gen platform, this bumper delivers high-clearance performance while maintaining compatibility with Toyota Safety Sense and factory parking sensors when equipped.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from 3\/16 inch laser cut P\u0026amp;O steel, the bumper is built to handle aggressive off-road use without compromising structural integrity. The integrated 3\/4 inch D-ring mounts are welded front and back for maximum strength in recovery situations. An optional 1 3\/4 inch OD tubular bull bar system adds additional protection and rigidity, while maintaining proper sensor function across all variants. You can opt for no bull bar, a full height bar, or a full height bar with headlight hoops for maximum front end coverage.\u003c\/p\u003e\n\n\u003cp\u003eThis bumper is engineered for serious overland setups with built-in winch capability. It includes a washer tank skid and a winch controller relocation kit to streamline installation and protect key components. Front-facing cutouts allow easy access to the winch lever, making operation simple in recovery situations. The design supports most non-integrated control box winches, with confirmed fitment for Warn Zeon XD and Evo series models. Synthetic rope winches with a hawse fairlead are recommended for optimal performance.\u003c\/p\u003e\n\n\u003cp\u003eLighting capability is centered around a dedicated 40 inch light bar mount designed for Baja Designs S8 or Rigid SR Series bars. Integrated fog light pockets are built specifically for Baja Designs Squadron lights, giving you a clean and functional lighting upgrade. Factory fog lights are not supported.\u003c\/p\u003e\n\n\u003cp\u003eFinished in a durable 2-stage hammer black powder coat, the bumper is built to withstand harsh environments while maintaining a refined appearance. Installation requires trimming of the factory plastic bumper and is best completed with two people. Some vehicles may require professional recalibration of the TSS system after installation.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432723673319,"sku":"1125-31300-01NA","price":2299.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-overland-series-front-bumper-6th-gen-2025-2026-high-bar-with-headlight-hoops-raw","title":"4Runner Overland Series Front Bumper \/ 6th Gen \/ 2025-2026 \/ High Bar with Headlight Hoops \/ RAW","description":"\u003cp\u003eThe C4 Fabrication Overland Series Front Bumper for the 2025+ Toyota 4Runner is built for full front-end protection, recovery capability, and clean integration with modern vehicle systems. Designed specifically for the 6th Gen platform, this bumper delivers high-clearance performance while maintaining compatibility with Toyota Safety Sense and factory parking sensors when equipped.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from 3\/16 inch laser cut P\u0026amp;O steel, the bumper is built to handle aggressive off-road use without compromising structural integrity. The integrated 3\/4 inch D-ring mounts are welded front and back for maximum strength in recovery situations. An optional 1 3\/4 inch OD tubular bull bar system adds additional protection and rigidity, while maintaining proper sensor function across all variants. You can opt for no bull bar, a full height bar, or a full height bar with headlight hoops for maximum front end coverage.\u003c\/p\u003e\n\n\u003cp\u003eThis bumper is engineered for serious overland setups with built-in winch capability. It includes a washer tank skid and a winch controller relocation kit to streamline installation and protect key components. Front-facing cutouts allow easy access to the winch lever, making operation simple in recovery situations. The design supports most non-integrated control box winches, with confirmed fitment for Warn Zeon XD and Evo series models. Synthetic rope winches with a hawse fairlead are recommended for optimal performance.\u003c\/p\u003e\n\n\u003cp\u003eLighting capability is centered around a dedicated 40 inch light bar mount designed for Baja Designs S8 or Rigid SR Series bars. Integrated fog light pockets are built specifically for Baja Designs Squadron lights, giving you a clean and functional lighting upgrade. Factory fog lights are not supported.\u003c\/p\u003e\n\n\u003cp\u003eFinished in a durable 2-stage hammer black powder coat, the bumper is built to withstand harsh environments while maintaining a refined appearance. Installation requires trimming of the factory plastic bumper and is best completed with two people. Some vehicles may require professional recalibration of the TSS system after installation.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432723706087,"sku":"1125-31400","price":2149.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-overland-series-front-bumper-6th-gen-2025-2026-high-bar-with-headlight-hoops-powder-coated","title":"4Runner Overland Series Front Bumper \/ 6th Gen \/ 2025-2026 \/ High Bar with Headlight Hoops \/ Powder Coated","description":"\u003cp\u003eThe C4 Fabrication Overland Series Front Bumper for the 2025+ Toyota 4Runner is built for full front-end protection, recovery capability, and clean integration with modern vehicle systems. Designed specifically for the 6th Gen platform, this bumper delivers high-clearance performance while maintaining compatibility with Toyota Safety Sense and factory parking sensors when equipped.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from 3\/16 inch laser cut P\u0026amp;O steel, the bumper is built to handle aggressive off-road use without compromising structural integrity. The integrated 3\/4 inch D-ring mounts are welded front and back for maximum strength in recovery situations. An optional 1 3\/4 inch OD tubular bull bar system adds additional protection and rigidity, while maintaining proper sensor function across all variants. You can opt for no bull bar, a full height bar, or a full height bar with headlight hoops for maximum front end coverage.\u003c\/p\u003e\n\n\u003cp\u003eThis bumper is engineered for serious overland setups with built-in winch capability. It includes a washer tank skid and a winch controller relocation kit to streamline installation and protect key components. Front-facing cutouts allow easy access to the winch lever, making operation simple in recovery situations. The design supports most non-integrated control box winches, with confirmed fitment for Warn Zeon XD and Evo series models. Synthetic rope winches with a hawse fairlead are recommended for optimal performance.\u003c\/p\u003e\n\n\u003cp\u003eLighting capability is centered around a dedicated 40 inch light bar mount designed for Baja Designs S8 or Rigid SR Series bars. Integrated fog light pockets are built specifically for Baja Designs Squadron lights, giving you a clean and functional lighting upgrade. Factory fog lights are not supported.\u003c\/p\u003e\n\n\u003cp\u003eFinished in a durable 2-stage hammer black powder coat, the bumper is built to withstand harsh environments while maintaining a refined appearance. Installation requires trimming of the factory plastic bumper and is best completed with two people. Some vehicles may require professional recalibration of the TSS system after installation.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432723738855,"sku":"1125-31400-01NA","price":2349.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-bed-side-molle-panels-4th-gen-2024-2026-driver","title":"Tacoma Bed Side MOLLE Panels \/ 4th Gen \/ 2024-2026 \/ Driver","description":"\u003cp\u003eThe Bed Side MOLLE Panels optimize your truck beds storage potential by providing extensive mounting space for a wide range of tools and accessories. The MOLLE design offers a diverse platform for securing overland gear and recovery equipment.\u003c\/p\u003e\n\n\u003cp\u003eNot only do the MOLLE panels equip your truck bed with added storage opportunities, but they also reinforce the factory composite bed. Our bed side storage panels are engineered for a precise fitment that perfectly follows the contours of your bed. They are expandable with our Bed Cab MOLLE Panels. The panels are made from heavy-duty steel that is finished in a resilient 2-stage hammer black powder coat.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432723771623,"sku":"1224-70300","price":289.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-bed-side-molle-panels-4th-gen-2024-2026-passenger","title":"Tacoma Bed Side MOLLE Panels \/ 4th Gen \/ 2024-2026 \/ Passenger","description":"\u003cp\u003eThe Bed Side MOLLE Panels optimize your truck beds storage potential by providing extensive mounting space for a wide range of tools and accessories. The MOLLE design offers a diverse platform for securing overland gear and recovery equipment.\u003c\/p\u003e\n\n\u003cp\u003eNot only do the MOLLE panels equip your truck bed with added storage opportunities, but they also reinforce the factory composite bed. Our bed side storage panels are engineered for a precise fitment that perfectly follows the contours of your bed. They are expandable with our Bed Cab MOLLE Panels. The panels are made from heavy-duty steel that is finished in a resilient 2-stage hammer black powder coat.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432723837159,"sku":"1224-70310","price":289.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-bed-cab-molle-panels-4th-gen-2024-2026","title":"Tacoma Bed Cab MOLLE Panels \/ 4th Gen \/ 2024-2026","description":"\u003cp\u003eThe Bed Cab MOLLE Panels unlock your truck bed’s full storage potential allowing you to secure a wide variety of recovery tools, overland gear, and off-road accessories. With our signature MOLLE design, you can utilize straps, bolts, and other attachment solutions to ensure your supplies are secure.\u003c\/p\u003e\n\n\u003cp\u003eOur MOLLE panels also offer added strength to the factory composite bed. They are engineered for a precise fitment, and retain the OEM tie down points.\u003c\/p\u003e\n\n\u003cp\u003eThey are crafted from heavy-duty steel and finished in a durable 2-stage hammer black powder coat. Paired with our Bed Side MOLLE Panels, you can maximize your truck bed’s full storage capabilities.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432723869927,"sku":"1224-70320","price":399.0,"currency_code":"USD","in_stock":true}]},{"product_id":"c4-winch-fairlead-closed-hook","title":"C4 Winch Fairlead | Closed Hook","description":"\u003cp\u003eC4 Winch Fairlead designed for synthetic rope winches with universal compatibility across most applications. CNC machined from 7075-T6 billet aluminum for increased strength and durability over cast options.\u003c\/p\u003e\n\n\u003cp\u003eAvailable in Open Hook (20,000 lb rating) or Closed Hook (30,000 lb rating) configurations. Features a patented interlocking design to secure the hook when not in use and a low-profile design to minimize protrusion.\u003c\/p\u003e\n\n\u003cp\u003eIndependently third-party tested. Finished in black anodizing with laser-etched detailing. Includes color-matched black stainless steel hardware.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432723902695,"sku":"AC9910590NA","price":249.98,"currency_code":"USD","in_stock":true}]},{"product_id":"c4-winch-fairlead-open-hook","title":"C4 Winch Fairlead | Open Hook","description":"\u003cp\u003eC4 Winch Fairlead designed for synthetic rope winches with universal compatibility across most applications. CNC machined from 7075-T6 billet aluminum for increased strength and durability over cast options.\u003c\/p\u003e\n\n\u003cp\u003eAvailable in Open Hook (20,000 lb rating) or Closed Hook (30,000 lb rating) configurations. Features a patented interlocking design to secure the hook when not in use and a low-profile design to minimize protrusion.\u003c\/p\u003e\n\n\u003cp\u003eIndependently third-party tested. Finished in black anodizing with laser-etched detailing. Includes color-matched black stainless steel hardware.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432723935463,"sku":"AC9910690NA","price":249.98,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-rock-sliders-6th-gen-2025-2026-raw","title":"4Runner Rock Sliders \/ 6th Gen \/ 2025-2026 \/ RAW","description":"\u003cp\u003eHeavy-duty rock sliders designed for 6th Gen 4Runner, compatible with all trim levels. Mounts to both the side and bottom of the frame for maximum strength and rocker panel protection. Constructed from a 2\" x 2\" square main tube with 1-3\/4\" OD DOM round tubing. Includes stainless steel step plates for added traction and usability. All required hardware is included.\u003c\/p\u003e\n\n\u003cp\u003eRaw steel option requires paint or powder coat prior to installation. Install can be completed by one person, though two people are recommended.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432723968231,"sku":"1125-20200","price":1299.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-rock-sliders-6th-gen-2025-2026-pc","title":"4Runner Rock Sliders \/ 6th Gen \/ 2025-2026 \/ PC","description":"\u003cp\u003eHeavy-duty rock sliders designed for 6th Gen 4Runner, compatible with all trim levels. Mounts to both the side and bottom of the frame for maximum strength and rocker panel protection. Constructed from a 2\" x 2\" square main tube with 1-3\/4\" OD DOM round tubing. Includes stainless steel step plates for added traction and usability. All required hardware is included.\u003c\/p\u003e\n\n\u003cp\u003eRaw steel option requires paint or powder coat prior to installation. Install can be completed by one person, though two people are recommended.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724000999,"sku":"1125-20200-01NA","price":1449.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-differential-skid-6th-gen-2025-raw","title":"4Runner Differential Skid \/ 6th Gen \/ 2025+ \/ RAW","description":"\u003cp\u003eThe C4 Fabrication 6th Gen 4Runner Differential Skid Plate provides essential protection for one of the most vulnerable components underneath your vehicle when traveling off-road. Designed specifically for the 2025+ Toyota 4Runner, this skid plate helps shield the rear differential while also extending forward to protect the driveshaft yoke and U-joint.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from 3\/16\" thick mild steel, the skid delivers reliable strength and impact resistance without excessive weight. The design mounts securely to the vehicle using the included hardware, providing a straightforward installation.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724066535,"sku":"1125-52300","price":349.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-differential-skid-6th-gen-2025-pc","title":"4Runner Differential Skid \/ 6th Gen \/ 2025+ \/ PC","description":"\u003cp\u003eThe C4 Fabrication 6th Gen 4Runner Differential Skid Plate provides essential protection for one of the most vulnerable components underneath your vehicle when traveling off-road. Designed specifically for the 2025+ Toyota 4Runner, this skid plate helps shield the rear differential while also extending forward to protect the driveshaft yoke and U-joint.\u003c\/p\u003e\n\n\u003cp\u003eConstructed from 3\/16\" thick mild steel, the skid delivers reliable strength and impact resistance without excessive weight. The design mounts securely to the vehicle using the included hardware, providing a straightforward installation.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724099303,"sku":"1125-52300-01NA","price":399.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-fuel-tank-skid-plate-6th-gen-2025-raw","title":"4Runner Fuel Tank Skid Plate \/ 6th Gen \/ 2025+ \/ RAW","description":"\u003cp\u003eC4 Fabrication Fuel Tank Skid Plate for the 2025+ Toyota 4Runner provides added protection for the fuel tank during off-road use. Built from heavy-duty 3\/16″ P\u0026amp;O steel and frame-mounted for strength, it helps shield the underside from rocks and trail debris.\u003c\/p\u003e\n\n\u003cp\u003eFeatures a 100% bolt-on installation with all required hardware included. Side archways allow for drainage while the solid bottom plate delivers full coverage and durability.\u003c\/p\u003e\n\n\u003cp\u003eUnless the powder coat option is selected, the skid plate must be painted or powder coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724132071,"sku":"1125-51200","price":499.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-fuel-tank-skid-plate-6th-gen-2025-pc","title":"4Runner Fuel Tank Skid Plate \/ 6th Gen \/ 2025+ \/ PC","description":"\u003cp\u003eC4 Fabrication Fuel Tank Skid Plate for the 2025+ Toyota 4Runner provides added protection for the fuel tank during off-road use. Built from heavy-duty 3\/16″ P\u0026amp;O steel and frame-mounted for strength, it helps shield the underside from rocks and trail debris.\u003c\/p\u003e\n\n\u003cp\u003eFeatures a 100% bolt-on installation with all required hardware included. Side archways allow for drainage while the solid bottom plate delivers full coverage and durability.\u003c\/p\u003e\n\n\u003cp\u003eUnless the powder coat option is selected, the skid plate must be painted or powder coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724164839,"sku":"1125-51200-01NA","price":599.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-roof-rack-with-solid-fairing-5th-gen-2014-2024","title":"4Runner Roof Rack with Solid Fairing \/ 5th Gen \/ 2014-2024","description":"\u003cp\u003eThe C4 Fabrication Roof Rack for the 2014-2024 Toyota 4Runner (5th Gen) is a low-profile, bolt-on roof storage solution designed to maximize cargo capacity while maintaining a clean factory-style fit. Constructed from lightweight aluminum, it provides a strong platform for rooftop tents, awnings, and additional gear.\u003c\/p\u003e\n\n\u003cp\u003eThe rack installs using factory mounting points and remains compatible with vehicles equipped with a sunroof. It adds only 1\/4\" above the factory antenna height for minimal added profile. Ten extruded aluminum crossmembers with mounting slots allow flexible accessory placement, while integrated tie-down points help secure cargo.\u003c\/p\u003e\n\n\u003cp\u003eAn optional fairing cutout supports a universal 40\" light bar or up to 10 pod lights with available mounts. The rack is also expandable with additional C4 accessories.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724263143,"sku":"1110-70100","price":1299.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-roof-rack-with-light-bar-mount-5th-gen-2014-2024","title":"4Runner Roof Rack with Light Bar Mount \/ 5th Gen \/ 2014-2024","description":"\u003cp\u003eThe C4 Fabrication Roof Rack for the 2014-2024 Toyota 4Runner (5th Gen) is a low-profile, bolt-on roof storage solution designed to maximize cargo capacity while maintaining a clean factory-style fit. Constructed from lightweight aluminum, it provides a strong platform for rooftop tents, awnings, and additional gear.\u003c\/p\u003e\n\n\u003cp\u003eThe rack installs using factory mounting points and remains compatible with vehicles equipped with a sunroof. It adds only 1\/4\" above the factory antenna height for minimal added profile. Ten extruded aluminum crossmembers with mounting slots allow flexible accessory placement, while integrated tie-down points help secure cargo.\u003c\/p\u003e\n\n\u003cp\u003eAn optional fairing cutout supports a universal 40\" light bar or up to 10 pod lights with available mounts. The rack is also expandable with additional C4 accessories.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724328679,"sku":"1110-70110","price":1389.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-external-molle-panels-5th-gen-2014-2024","title":"4Runner External MOLLE Panels \/ 5th Gen \/ 2014-2024","description":"\u003cp\u003eC4 Fabrication External MOLLE Panels for the 2014-2024 Toyota 4Runner provide additional exterior mounting space for tools, recovery gear, and overland accessories. Designed for precise vehicle fitment, these panels feature a MOLLE-compatible pattern and are ready to accept a RotopaX mount (not included) for tanks on each side.\u003c\/p\u003e\n\n\u003cp\u003eThe panels mount to the C4 Fabrication 5th Gen 4Runner Roof Rack and secure at the bottom with high-strength suction cups for added stability. Finished in a durable hammer black powder coat and sold as a pair.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724361447,"sku":"1110-70200","price":589.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-rear-window-molle-panel-pair-5th-gen-2014-2024","title":"4Runner Rear Window MOLLE Panel Pair \/ 5th Gen \/ 2014-2024","description":"\u003cp\u003eThe C4 Fabrication Rear Window MOLLE Panel Pair for the 2014-2024 Toyota 4Runner adds practical storage and organization to the rear cargo area. Designed with a universal MOLLE pattern, these panels provide secure mounting points for tools, recovery gear, and other MOLLE-compatible accessories without taking up valuable cargo space.\u003c\/p\u003e\n\n\u003cp\u003eFormed for a precise fit, the panels mount to the rear side windows and feature integrated provisions for optional Baja Designs dome lights. The system is also expandable with the C4 Add-On Shelf System (Part# 1110-70220). Finished in a durable hammer black powder coat, the panels offer long-lasting protection and a clean, low-profile appearance.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724394215,"sku":"1110-70210","price":359.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-add-on-shelf-for-rear-window-molle-panels-5th-gen-2014-2024","title":"4Runner Add-On Shelf for Rear Window MOLLE Panels \/ 5th Gen \/ 2014-2024","description":"\u003cp\u003eThe C4 Fabrication 4Runner Add-On Shelf expands storage capability when used with the C4 Rear Window MOLLE Panel System. It provides an elevated platform for organizing tools, recovery gear, and accessories while maximizing rear cargo space.\u003c\/p\u003e\n\n\u003cp\u003eThe shelf mounts directly to the MOLLE panels and can be installed at multiple heights to suit different storage needs. MOLLE compatibility allows for secure attachment of a wide range of accessories. Finished in a durable hammer black powder coat.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724426983,"sku":"1110-70220","price":359.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-lo-pro-rear-bumper-6th-gen-2025-raw","title":"4Runner Lo-Pro Rear Bumper \/ 6th Gen \/ 2025+ \/ RAW","description":"\u003cp\u003eThe 2025+ Toyota 4Runner Lo-Pro Rear Bumper is a low-profile steel rear bumper designed to add protection and recovery capability while maintaining factory functionality. It fits all 6th Gen 4Runner trims and retains OEM parking sensors and driver-assist features.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from an 11-gauge steel outer shell with 3\/16\" steel mounting brackets, the bumper provides durable rear-end protection and includes fully welded 3\/4\" D-ring recovery tabs. The design follows factory body lines for a clean, integrated appearance.\u003c\/p\u003e\n\n\u003cp\u003eInstallation requires trimming of the center section of the factory bumper cover. All required mounting brackets and hardware are included.\u003c\/p\u003e\n\n\u003cp\u003eThe bumper is designed to accept a pair of Baja Designs S2 Flush Mount (other light brands not guaranteed to fit).\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724492519,"sku":"1125-10700","price":849.99,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-lo-pro-rear-bumper-6th-gen-2025-powder-coat","title":"4Runner Lo-Pro Rear Bumper \/ 6th Gen \/ 2025+ \/ POWDER COAT","description":"\u003cp\u003eThe 2025+ Toyota 4Runner Lo-Pro Rear Bumper is a low-profile steel rear bumper designed to add protection and recovery capability while maintaining factory functionality. It fits all 6th Gen 4Runner trims and retains OEM parking sensors and driver-assist features.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from an 11-gauge steel outer shell with 3\/16\" steel mounting brackets, the bumper provides durable rear-end protection and includes fully welded 3\/4\" D-ring recovery tabs. The design follows factory body lines for a clean, integrated appearance.\u003c\/p\u003e\n\n\u003cp\u003eInstallation requires trimming of the center section of the factory bumper cover. All required mounting brackets and hardware are included.\u003c\/p\u003e\n\n\u003cp\u003eThe bumper is designed to accept a pair of Baja Designs S2 Flush Mount (other light brands not guaranteed to fit).\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724558055,"sku":"1125-10700-01NA","price":949.99,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-roof-rack-4th-gen-2024-2026","title":"Tacoma Roof Rack \/ 4th Gen \/ 2024-2026","description":"\u003cp\u003eThe Tacoma Roof Rack with Optional Light Bar Mount is designed for the 4th Gen Tacoma, delivering a low-profile, high-strength solution for expanding rooftop cargo capacity. Constructed from lightweight aluminum, the rack maximizes storage space while adding only 1\/4\" above the factory antenna and remaining compatible with sunroof-equipped vehicles.\u003c\/p\u003e\n\n\u003cp\u003eSeven extruded aluminum crossmembers with integrated mounting slots provide flexible options for securing gear, rooftop tents, awnings, and accessories. Integrated tie-down points help keep cargo secure, while mounting provisions support aftermarket antennas, flags, and additional equipment. The fairing features an optional cutout for a universal 40\" light bar, or can support up to 10 pod lights with compatible mounts. The rack is fully expandable with other C4 accessories.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is bolt-on using factory mounting points with no drilling required. All necessary hardware is included, and 2-3 people are recommended for installation.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724590823,"sku":"1224-70100","price":1179.95,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-roof-rack-with-light-bar-mount-4th-gen-2024-2026","title":"Tacoma Roof Rack with Light Bar Mount \/ 4th Gen \/ 2024-2026","description":"\u003cp\u003eThe Tacoma Roof Rack with Optional Light Bar Mount is designed for the 4th Gen Tacoma, delivering a low-profile, high-strength solution for expanding rooftop cargo capacity. Constructed from lightweight aluminum, the rack maximizes storage space while adding only 1\/4\" above the factory antenna and remaining compatible with sunroof-equipped vehicles.\u003c\/p\u003e\n\n\u003cp\u003eSeven extruded aluminum crossmembers with integrated mounting slots provide flexible options for securing gear, rooftop tents, awnings, and accessories. Integrated tie-down points help keep cargo secure, while mounting provisions support aftermarket antennas, flags, and additional equipment. The fairing features an optional cutout for a universal 40\" light bar, or can support up to 10 pod lights with compatible mounts. The rack is fully expandable with other C4 accessories.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is bolt-on using factory mounting points with no drilling required. All necessary hardware is included, and 2-3 people are recommended for installation.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724623591,"sku":"1224-70110","price":1259.95,"currency_code":"USD","in_stock":true}]},{"product_id":"land-cruiser-roof-rack-with-optional-light-bar-mount-250-series-2024-2026","title":"Land Cruiser Roof Rack with Optional Light Bar Mount \/ 250 Series \/ 2024-2026","description":"\u003cp\u003eLow-profile aluminum roof rack designed for the 2024+ Land Cruiser 250 Series. Provides a strong, lightweight platform for rooftop tents, awnings, lighting, and general cargo.\u003c\/p\u003e\n\n\u003cp\u003eFeatures eight extruded aluminum crossmembers with integrated mounting slots, built-in tie-down points, and a precision-fit fairing with an optional light bar cutout. Rack mounts directly to factory roof mounting points with a bolt-on installation and no drilling required. Compatible with the factory sunroof and adds only 1\/4\" of height above the OEM antenna.\u003c\/p\u003e\n\n\u003cp\u003eSupports mounting for a universal 40\" straight or curved light bar or up to ten pod lights, with optional Illuminator light mounts available. Expandable with additional C4 accessories. Installation recommended with two or more people.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724656359,"sku":"1624-70100","price":1549.98,"currency_code":"USD","in_stock":true}]},{"product_id":"land-cruiser-roof-rack-with-light-bar-mount-250-series-2024-2026","title":"Land Cruiser Roof Rack with Light Bar Mount \/ 250 Series \/ 2024-2026","description":"\u003cp\u003eLow-profile aluminum roof rack designed for the 2024+ Land Cruiser 250 Series. Provides a strong, lightweight platform for rooftop tents, awnings, lighting, and general cargo.\u003c\/p\u003e\n\n\u003cp\u003eFeatures eight extruded aluminum crossmembers with integrated mounting slots, built-in tie-down points, and a precision-fit fairing with an optional light bar cutout. Rack mounts directly to factory roof mounting points with a bolt-on installation and no drilling required. Compatible with the factory sunroof and adds only 1\/4\" of height above the OEM antenna.\u003c\/p\u003e\n\n\u003cp\u003eSupports mounting for a universal 40\" straight or curved light bar or up to ten pod lights, with optional Illuminator light mounts available. Expandable with additional C4 accessories. Installation recommended with two or more people.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724689127,"sku":"1624-70110","price":1599.95,"currency_code":"USD","in_stock":true}]},{"product_id":"land-cruiser-external-molle-panels-250-series-2024-2026","title":"Land Cruiser External Molle Panels \/ 250 Series \/ 2024-2026","description":"\u003cp\u003eExternal MOLLE panels designed for the Land Cruiser 250 Series. These panels provide additional exterior mounting space for gear and accessories while maintaining a clean, low-profile fit.\u003c\/p\u003e\n\n\u003cp\u003ePanels mount to the C4 Fabrication Land Cruiser Roof Rack at the top and are stabilized at the bottom using high-strength suction cups. The MOLLE pattern is compatible with common mounting systems and supports optional RotopaX and Quick Fist accessories (sold separately).\u003c\/p\u003e\n\n\u003cp\u003eSold as a pair and finished in a durable hammer black powder coat.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724721895,"sku":"1624-70200","price":530.9,"currency_code":"USD","in_stock":true}]},{"product_id":"land-cruiser-rear-window-molle-panel-pair-250-series-2024-2026","title":"Land Cruiser Rear Window Molle Panel Pair \/ 250 Series \/ 2024-2026","description":"\u003cp\u003eRear window MOLLE panels designed to add organized storage to the Land Cruiser 250 rear cargo area. Panels mount to the interior rear window area and provide MOLLE-compatible mounting for tools, recovery gear, and accessories without significantly reducing cargo space.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with Baja Designs dome lights and expandable with the optional add-on shelf system (Part #1624-70220). Finished in a durable hammer black powder coat. Sold as a left and right panel set.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724754663,"sku":"1624-70210","price":399.95,"currency_code":"USD","in_stock":true}]},{"product_id":"land-cruiser-add-on-shelf-for-rear-window-molle-panels-250-series-2024-2026","title":"Land Cruiser Add-On Shelf for Rear Window Molle Panels \/ 250 Series \/ 2024-2026","description":"\u003cp\u003eAdd-on shelf designed to mount to the C4 Rear Window MOLLE Panel System to increase rear cargo storage. Provides adjustable mounting height along the MOLLE panels and supports mounting on both the top and bottom surfaces of the shelf. MOLLE-compatible pattern allows use of common MOLLE accessories, tools, and recovery gear.\u003c\/p\u003e\n\n\u003cp\u003eFinished in a Hammer Black powder coat for durability and a clean, factory-style appearance. Requires C4 Rear Window MOLLE Panels (Part #1624-70210) for installation.Approximate install time is 20 minutes.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724787431,"sku":"1624-70220","price":414.98,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-summit-hatch-ladder-6th-gen-2025-2026","title":"4Runner Summit Hatch Ladder \/ 6th Gen \/ 2025-2026","description":"\u003cp\u003eRear hatch–mounted ladder designed for roof access on the 6th Gen Toyota 4Runner. Features lightweight aluminum T-slot steps with rubber traction strips, steel mounting brackets, and stainless hardware. Finished in Hammer Black powder coat. Rated for 250 lb static load and 20 lb dynamic load. Drilling required for installation. Optional steel side steps and Rotopax mount available.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724820199,"sku":"1125-60100","price":569.98,"currency_code":"USD","in_stock":true}]},{"product_id":"toyota-4runner-lo-pro-winch-bumper-6th-gen-2025-raw","title":"Toyota 4Runner Lo-Pro Winch Bumper \/ 6th Gen \/ 2025+ (Raw)","description":"\u003cp\u003eLow-profile C4 Fabrication winch bumper designed for the 2025+ Toyota 4Runner. Constructed with an 11-gauge steel outer shell and a 3\/16-inch steel winch plate and mounting brackets. Features fully welded 3\/4-inch D-ring recovery tabs and supports winch and auxiliary lighting installation. Includes all required mounting brackets and hardware.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with all trims; TRD Pro and Trailhunter models require front skid trimming for clearance. Fully compatible with TSS, front camera, parking sensors, and driver assist systems. Cutting of the center plastic portion of the factory bumper cover is required for installation.\u003c\/p\u003e\n\n\u003cp\u003eDesigned for a Baja Designs S8 20-inch light bar and compatible with RIGID 20-inch SR Series light bars. Integrated light pockets for Baja Designs S2 fog lights. Fits most winches without integrated control boxes; relocation recommended. Confirmed fitment with Warn Zeon XD and Warn Evo 10-S and 12-S winches.\u003c\/p\u003e\n\n\u003cp\u003eBare steel versions must be painted or powder coated prior to installation to prevent corrosion.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724852967,"sku":"1125-10300","price":889.0,"currency_code":"USD","in_stock":true}]},{"product_id":"toyota-4runner-lo-pro-winch-bumper-6th-gen-2025-powder-coated","title":"Toyota 4Runner Lo-Pro Winch Bumper \/ 6th Gen \/ 2025+ (Powder Coated)","description":"\u003cp\u003eLow-profile C4 Fabrication winch bumper designed for the 2025+ Toyota 4Runner. Constructed with an 11-gauge steel outer shell and a 3\/16-inch steel winch plate and mounting brackets. Features fully welded 3\/4-inch D-ring recovery tabs and supports winch and auxiliary lighting installation. Includes all required mounting brackets and hardware.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with all trims; TRD Pro and Trailhunter models require front skid trimming for clearance. Fully compatible with TSS, front camera, parking sensors, and driver assist systems. Cutting of the center plastic portion of the factory bumper cover is required for installation.\u003c\/p\u003e\n\n\u003cp\u003eDesigned for a Baja Designs S8 20-inch light bar and compatible with RIGID 20-inch SR Series light bars. Integrated light pockets for Baja Designs S2 fog lights. Fits most winches without integrated control boxes; relocation recommended. Confirmed fitment with Warn Zeon XD and Warn Evo 10-S and 12-S winches.\u003c\/p\u003e\n\n\u003cp\u003eBare steel versions must be painted or powder coated prior to installation to prevent corrosion.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724885735,"sku":"1125-10300-01NA","price":999.0,"currency_code":"USD","in_stock":true}]},{"product_id":"toyota-4runner-roof-rack-with-optional-light-bar-mount-6th-gen-2025-no-light-mount","title":"Toyota 4Runner Roof Rack with Optional Light Bar Mount \/ 6th Gen \/ 2025+ (No Light Mount)","description":"\u003cp\u003eThis low-profile roof rack is designed specifically for the 2025+ Toyota 4Runner, offering a clean, factory-style fit with added strength and versatility. Constructed from lightweight aluminum, it provides a durable platform for cargo, accessories, and overland equipment without adding unnecessary height.\u003c\/p\u003e\n\n\u003cp\u003eAn optional light bar cutout in the front fairing allows for a clean install of a 40\" light bar or auxiliary pod lights. Integrated tie-down points and multiple mounting options make it ideal for rooftop tents, awnings, and additional accessories such as antennas or flags.\u003c\/p\u003e\n\n\u003cp\u003eThe rack installs directly to the factory mounting points, maintains sunroof functionality, and adds only 1\/4\" of height above the factory antenna. Installation requires two or more people.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724918503,"sku":"1125-70100","price":1198.98,"currency_code":"USD","in_stock":true}]},{"product_id":"toyota-4runner-roof-rack-with-optional-light-bar-mount-6th-gen-2025-with-light-mount","title":"Toyota 4Runner Roof Rack with Optional Light Bar Mount \/ 6th Gen \/ 2025+ (With Light Mount)","description":"\u003cp\u003eThis low-profile roof rack is designed specifically for the 2025+ Toyota 4Runner, offering a clean, factory-style fit with added strength and versatility. Constructed from lightweight aluminum, it provides a durable platform for cargo, accessories, and overland equipment without adding unnecessary height.\u003c\/p\u003e\n\n\u003cp\u003eAn optional light bar cutout in the front fairing allows for a clean install of a 40\" light bar or auxiliary pod lights. Integrated tie-down points and multiple mounting options make it ideal for rooftop tents, awnings, and additional accessories such as antennas or flags.\u003c\/p\u003e\n\n\u003cp\u003eThe rack installs directly to the factory mounting points, maintains sunroof functionality, and adds only 1\/4\" of height above the factory antenna. Installation requires two or more people.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432724951271,"sku":"1125-70110","price":1298.98,"currency_code":"USD","in_stock":true}]},{"product_id":"toyota-4runner-external-molle-panels-6th-gen-2025","title":"Toyota 4Runner External Molle Panels \/ 6th Gen \/ 2025+","description":"\u003cp\u003eThese External Molle Panels are designed to add convenient, modular gear storage to the 2025+ 6th Gen Toyota 4Runner. They mount cleanly to the C4 Fabrication roof rack and provide a strong, versatile platform for carrying trail and overland gear.\u003c\/p\u003e\n\n\u003cp\u003eThe molle pattern supports a wide variety of accessories and comes ready to accept a RotopaX mount, allowing customers to carry up to a 2-gallon RotopaX fuel or water container on each side (mounts and containers sold separately). Each panel attaches to the roof rack at the top and is stabilized at the bottom with high-strength suction cups for a secure, non-invasive install.\u003c\/p\u003e\n\n\u003cp\u003eSold as a pair and finished in a durable hammer black powder coat, these panels are built for long-term use and made in the USA.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432725016807,"sku":"1125-70200","price":549.98,"currency_code":"USD","in_stock":true}]},{"product_id":"toyota-4runner-rear-window-molle-panel-pair-6th-gen-2025","title":"Toyota 4Runner Rear Window Molle Panel Pair \/ 6th Gen \/ 2025+","description":"\u003cp\u003eThe C4 Fabrication Rear Window Molle Panels are designed to make better use of the rear cargo area in the 2025+ Toyota 4Runner. These panels mount along the rear windows and provide a clean, low-profile way to organize and secure gear.\u003c\/p\u003e\n\n\u003cp\u003eFeaturing a universal molle pattern, they allow easy attachment of tools, recovery gear, and molle-compatible accessories. Integrated mounting points support optional Baja Designs Dome Lights for added cargo area lighting, and the system can be expanded with C4 Fabrication’s add-on shelf for even more storage options.\u003c\/p\u003e\n\n\u003cp\u003eFinished in a durable hammer black powder coat, the panels offer a rugged, OEM-style appearance and are sold as a left and right pair.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432725049575,"sku":"1125-70210","price":398.95,"currency_code":"USD","in_stock":true}]},{"product_id":"toyota-4runner-add-on-shelf-for-rear-window-molle-panels-6th-gen-2025","title":"Toyota 4Runner Add-On Shelf for Rear Window Molle Panels \/ 6th Gen \/ 2025+","description":"\u003cp\u003eThe C4 Fabrication Add-On Shelf for Rear Window Molle Panels is a simple and effective way to increase rear cargo storage in 2025+ Toyota 4Runner models. Designed to work exclusively with the C4 Rear Window Molle Panel System, this shelf adds a sturdy platform for organizing gear in the rear of the vehicle.\u003c\/p\u003e\n\n\u003cp\u003eThe shelf can be mounted at different heights to fit various cargo needs and features molle slots on both the top and bottom surfaces for attaching accessories, tools, and recovery gear. Finished in a durable hammer black powder coat and made in the USA, it’s built for long-lasting performance on and off the trail.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432725115111,"sku":"1125-70220","price":398.95,"currency_code":"USD","in_stock":true}]},{"product_id":"land-cruiser-4runner-tacoma-front-skid-plate-250-series-6th-gen-4th-gen-2024-raw-unfinished","title":"Land Cruiser, 4Runner \u0026 Tacoma Front Skid Plate \/ 250 Series, 6th Gen \u0026 4th Gen \/ 2024+ | Raw - Unfinished","description":"Compatible with SR5, TRD Sport, TRD Off-Road, and TRD Pro.\nWide coverage to help protect vital engine components.\nProtects the bottom of the radiator which is exposed on models without the TRD Off Road package.\nCompatible with factory sway bar skid plate on models with the electronic disconnecting sway bar\nMade from 3\/16\" CNC cut P\u0026amp;O steel\n100% Bolt-On design\nOil Drain and Oil Filter Covers allow for easy oil changes without removing the skid plates\nWorks with most aftermarket bumpers\nWeighs 50lb\nAll mounting hardware included\nIncludes front skid plate only\n\nSkid plate is a 2-piece design\nAvailable in steel only\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432725180647,"sku":"1224-50400","price":599.0,"currency_code":"USD","in_stock":true}]},{"product_id":"land-cruiser-4runner-tacoma-front-skid-plate-250-series-6th-gen-4th-gen-2024-hammer-black-powder-coat","title":"Land Cruiser, 4Runner \u0026 Tacoma Front Skid Plate \/ 250 Series, 6th Gen \u0026 4th Gen \/ 2024+ | Hammer Black Powder Coat","description":"Compatible with SR5, TRD Sport, TRD Off-Road, and TRD Pro.\nWide coverage to help protect vital engine components.\nProtects the bottom of the radiator which is exposed on models without the TRD Off Road package.\nCompatible with factory sway bar skid plate on models with the electronic disconnecting sway bar\nMade from 3\/16\" CNC cut P\u0026amp;O steel\n100% Bolt-On design\nOil Drain and Oil Filter Covers allow for easy oil changes without removing the skid plates\nWorks with most aftermarket bumpers\nWeighs 50lb\nAll mounting hardware included\nIncludes front skid plate only\n\nSkid plate is a 2-piece design\nAvailable in steel only\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432725213415,"sku":"1224-50400-01NA","price":699.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-rear-skid-plates-4th-gen-2024-iforce-2-4l-4-cyl-turbo-w-automatic-transmission-sway-bar-disconnect-skid-if-you-dont-know-choose-this-one-raw-unfinished","title":"Tacoma Rear Skid Plates \/ 4th Gen \/ 2024+ | iForce 2.4L 4-Cyl. Turbo w\/ Automatic Transmission | Sway Bar Disconnect Skid (If you don't know choose this one!) | Raw - Unfinished","description":"Front skid required to install (sold separately). Does not work without C4 Front skid.\nOnly compatible with C4 Front skid plate\nProtects transmission, transfer case and exhaust (including catalytic converters)\nIncludes a unique bolt-in crossmember for maximum strength and protection for the transfer case\n\nMade from 3\/16\" CNC cut P\u0026amp;O steel\n\n100% Bolt-On design\nWeighs 72lb\nAll mounting hardware included\nIncludes transmission and transfer case skid plates only\nDOES NOT include front skid plate\nAvailable in steel only\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432725278951,"sku":"1224-50500","price":749.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-rear-skid-plates-4th-gen-2024-iforce-2-4l-4-cyl-turbo-w-automatic-transmission-sway-bar-disconnect-skid-if-you-dont-know-choose-this-one-hammer-black-powder-coat","title":"Tacoma Rear Skid Plates \/ 4th Gen \/ 2024+ | iForce 2.4L 4-Cyl. Turbo w\/ Automatic Transmission | Sway Bar Disconnect Skid (If you don't know choose this one!) | Hammer Black Powder Coat","description":"Front skid required to install (sold separately). Does not work without C4 Front skid.\nOnly compatible with C4 Front skid plate\nProtects transmission, transfer case and exhaust (including catalytic converters)\nIncludes a unique bolt-in crossmember for maximum strength and protection for the transfer case\n\nMade from 3\/16\" CNC cut P\u0026amp;O steel\n\n100% Bolt-On design\nWeighs 72lb\nAll mounting hardware included\nIncludes transmission and transfer case skid plates only\nDOES NOT include front skid plate\nAvailable in steel only\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432725311719,"sku":"1224-50500-01NA","price":799.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4th-gen-tacoma-6th-gen-4runner-full-skid-plates-2024-iforce-max-hybrid-w-automatic-transmission-sway-bar-disconnect-skid-if-you-dont-know-choose-this-one-raw-unfinished","title":"4th Gen Tacoma \u0026 6th Gen 4Runner Full Skid Plates \/ 2024+ | iForce MAX Hybrid w\/ Automatic Transmission | Sway Bar Disconnect Skid (If you don't know choose this one!) | Raw - Unfinished","description":"Wide coverage to help protect vital engine components.\nProtects the bottom of the radiator which is exposed on models without the TRD Off Road package.\nIncludes Front and Rear Skid plates which protect the bottom of your Tacoma from the radiator all the way back to the transfer case.\nMade from 3\/16\" CNC cut P\u0026amp;O steel\n\n100% Bolt-On design\nOil Drain and Oil Filter Covers allow for easy oil changes without removing the skid plates\n\nWorks with most aftermarket bumpers\nWeighs 122lb\nAll mounting hardware included\n\nAvailable in steel only\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432725377255,"sku":"1224-50600","price":1199.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4th-gen-tacoma-6th-gen-4runner-full-skid-plates-2024-iforce-2-4l-4-cyl-turbo-w-automatic-transmission-sway-bar-disconnect-skid-if-you-dont-know-choose-this-one-hammer-black-powder-coat","title":"4th Gen Tacoma \u0026 6th Gen 4Runner Full Skid Plates \/ 2024+ | iForce 2.4L 4-Cyl. Turbo w\/ Automatic Transmission | Sway Bar Disconnect Skid (If you don't know choose this one!) | Hammer Black Powder Coat","description":"Wide coverage to help protect vital engine components.\nProtects the bottom of the radiator which is exposed on models without the TRD Off Road package.\nIncludes Front and Rear Skid plates which protect the bottom of your Tacoma from the radiator all the way back to the transfer case.\nMade from 3\/16\" CNC cut P\u0026amp;O steel\n\n100% Bolt-On design\nOil Drain and Oil Filter Covers allow for easy oil changes without removing the skid plates\n\nWorks with most aftermarket bumpers\nWeighs 122lb\nAll mounting hardware included\n\nAvailable in steel only\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432725410023,"sku":"1224-50600-01NA","price":1359.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-lo-pro-winch-bumper-5th-gen-2014-2024-30-light-cutout-full-height-bull-bar-will-not-interfere-with-tss-raw-unfinished","title":"4Runner Lo-Pro Winch Bumper \/ 5th Gen \/ 2014-2024 | 30\" Light Cutout | Full-Height Bull Bar (WILL NOT INTERFERE WITH TSS) | Raw - Unfinished","description":"\u003cp\u003eBumper is compatible with TSS on 2020+ models \u0026amp; MTM on 2022+ models\u003c\/p\u003e\n\n\u003cp\u003eFull Height Bar is compatible with TSS\u003c\/p\u003e\n\n\u003cp\u003eMid Height Bar is NOT compatible with TSS\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with 2014+ Limited or 2022+ Sports trims\u003c\/p\u003e\n\n\u003cp\u003eCompatible with TRD Pro skid plate\u003c\/p\u003e\n\n\u003cp\u003eCutting of the center plastic portion of the factory bumper cover is required to install the bumper\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eLighting \u0026amp; Winch Options\u003c\/p\u003e\n\n\u003cp\u003eLo Profile Fitment\u003c\/p\u003e\n\n\u003cp\u003eClevis Mounts for D-Rings\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eIncludes all Necessary Mounting Brackets \u0026amp; Hardware for Install\u003c\/p\u003e\n\n\u003cp\u003eBumper Weighs 75lbs\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eDesigned Specifically for the Baja Designs S8 30” Light Bar\u003c\/p\u003e\n\n\u003cp\u003eAlso compatible with the RIGID 30” SR Series and Extreme LED 30” 5D Light Bar\u003c\/p\u003e\n\n\u003cp\u003eFits Most Winches 8k-12k in Size. Winches with the ability to relocate control box recommended. Confirmed fitment on ComeUp, Smittybilt X20, Warn Zeon and VR series winches.\u003c\/p\u003e\n\n\u003cp\u003eWe Recommend Synthetic Rope Winches \u0026amp; Hawse Style Fairleads for Best Functionality\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432725475559,"sku":"1100-1114-30-FH","price":996.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-lo-pro-winch-bumper-5th-gen-2014-2024-30-light-cutout-full-height-bull-bar-will-not-interfere-with-tss-hammer-black-powder-coat","title":"4Runner Lo-Pro Winch Bumper \/ 5th Gen \/ 2014-2024 | 30\" Light Cutout | Full-Height Bull Bar (WILL NOT INTERFERE WITH TSS) | Hammer Black Powder Coat","description":"\u003cp\u003eBumper is compatible with TSS on 2020+ models \u0026amp; MTM on 2022+ models\u003c\/p\u003e\n\n\u003cp\u003eFull Height Bar is compatible with TSS\u003c\/p\u003e\n\n\u003cp\u003eMid Height Bar is NOT compatible with TSS\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with 2014+ Limited or 2022+ Sports trims\u003c\/p\u003e\n\n\u003cp\u003eCompatible with TRD Pro skid plate\u003c\/p\u003e\n\n\u003cp\u003eCutting of the center plastic portion of the factory bumper cover is required to install the bumper\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eLighting \u0026amp; Winch Options\u003c\/p\u003e\n\n\u003cp\u003eLo Profile Fitment\u003c\/p\u003e\n\n\u003cp\u003eClevis Mounts for D-Rings\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eIncludes all Necessary Mounting Brackets \u0026amp; Hardware for Install\u003c\/p\u003e\n\n\u003cp\u003eBumper Weighs 75lbs\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eDesigned Specifically for the Baja Designs S8 30” Light Bar\u003c\/p\u003e\n\n\u003cp\u003eAlso compatible with the RIGID 30” SR Series and Extreme LED 30” 5D Light Bar\u003c\/p\u003e\n\n\u003cp\u003eFits Most Winches 8k-12k in Size. Winches with the ability to relocate control box recommended. Confirmed fitment on ComeUp, Smittybilt X20, Warn Zeon and VR series winches.\u003c\/p\u003e\n\n\u003cp\u003eWe Recommend Synthetic Rope Winches \u0026amp; Hawse Style Fairleads for Best Functionality\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432725508327,"sku":"1100-1114-30-FH-01NA","price":1159.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-lo-pro-winch-bumper-5th-gen-2014-2024-30-light-cutout-mid-height-bull-bar-will-block-tss-sensor-raw-unfinished","title":"4Runner Lo-Pro Winch Bumper \/ 5th Gen \/ 2014-2024 | 30\" Light Cutout | Mid-Height Bull Bar (WILL BLOCK TSS SENSOR) | Raw - Unfinished","description":"\u003cp\u003eBumper is compatible with TSS on 2020+ models \u0026amp; MTM on 2022+ models\u003c\/p\u003e\n\n\u003cp\u003eFull Height Bar is compatible with TSS\u003c\/p\u003e\n\n\u003cp\u003eMid Height Bar is NOT compatible with TSS\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with 2014+ Limited or 2022+ Sports trims\u003c\/p\u003e\n\n\u003cp\u003eCompatible with TRD Pro skid plate\u003c\/p\u003e\n\n\u003cp\u003eCutting of the center plastic portion of the factory bumper cover is required to install the bumper\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eLighting \u0026amp; Winch Options\u003c\/p\u003e\n\n\u003cp\u003eLo Profile Fitment\u003c\/p\u003e\n\n\u003cp\u003eClevis Mounts for D-Rings\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eIncludes all Necessary Mounting Brackets \u0026amp; Hardware for Install\u003c\/p\u003e\n\n\u003cp\u003eBumper Weighs 75lbs\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eDesigned Specifically for the Baja Designs S8 30” Light Bar\u003c\/p\u003e\n\n\u003cp\u003eAlso compatible with the RIGID 30” SR Series and Extreme LED 30” 5D Light Bar\u003c\/p\u003e\n\n\u003cp\u003eFits Most Winches 8k-12k in Size. Winches with the ability to relocate control box recommended. Confirmed fitment on ComeUp, Smittybilt X20, Warn Zeon and VR series winches.\u003c\/p\u003e\n\n\u003cp\u003eWe Recommend Synthetic Rope Winches \u0026amp; Hawse Style Fairleads for Best Functionality\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432725573863,"sku":"1100-1114-30-MH","price":961.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-lo-pro-winch-bumper-5th-gen-2014-2024-30-light-cutout-mid-height-bull-bar-will-block-tss-sensor-hammer-black-powder-coat","title":"4Runner Lo-Pro Winch Bumper \/ 5th Gen \/ 2014-2024 | 30\" Light Cutout | Mid-Height Bull Bar (WILL BLOCK TSS SENSOR) | Hammer Black Powder Coat","description":"\u003cp\u003eBumper is compatible with TSS on 2020+ models \u0026amp; MTM on 2022+ models\u003c\/p\u003e\n\n\u003cp\u003eFull Height Bar is compatible with TSS\u003c\/p\u003e\n\n\u003cp\u003eMid Height Bar is NOT compatible with TSS\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with 2014+ Limited or 2022+ Sports trims\u003c\/p\u003e\n\n\u003cp\u003eCompatible with TRD Pro skid plate\u003c\/p\u003e\n\n\u003cp\u003eCutting of the center plastic portion of the factory bumper cover is required to install the bumper\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eLighting \u0026amp; Winch Options\u003c\/p\u003e\n\n\u003cp\u003eLo Profile Fitment\u003c\/p\u003e\n\n\u003cp\u003eClevis Mounts for D-Rings\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eIncludes all Necessary Mounting Brackets \u0026amp; Hardware for Install\u003c\/p\u003e\n\n\u003cp\u003eBumper Weighs 75lbs\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eDesigned Specifically for the Baja Designs S8 30” Light Bar\u003c\/p\u003e\n\n\u003cp\u003eAlso compatible with the RIGID 30” SR Series and Extreme LED 30” 5D Light Bar\u003c\/p\u003e\n\n\u003cp\u003eFits Most Winches 8k-12k in Size. Winches with the ability to relocate control box recommended. Confirmed fitment on ComeUp, Smittybilt X20, Warn Zeon and VR series winches.\u003c\/p\u003e\n\n\u003cp\u003eWe Recommend Synthetic Rope Winches \u0026amp; Hawse Style Fairleads for Best Functionality\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432725639399,"sku":"1100-1114-30-MH-01NA","price":1099.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-lo-pro-winch-bumper-5th-gen-2014-2024-30-light-cutout-no-bull-bar-raw-unfinished","title":"4Runner Lo-Pro Winch Bumper \/ 5th Gen \/ 2014-2024 | 30\" Light Cutout | No Bull Bar | Raw - Unfinished","description":"\u003cp\u003eBumper is compatible with TSS on 2020+ models \u0026amp; MTM on 2022+ models\u003c\/p\u003e\n\n\u003cp\u003eFull Height Bar is compatible with TSS\u003c\/p\u003e\n\n\u003cp\u003eMid Height Bar is NOT compatible with TSS\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with 2014+ Limited or 2022+ Sports trims\u003c\/p\u003e\n\n\u003cp\u003eCompatible with TRD Pro skid plate\u003c\/p\u003e\n\n\u003cp\u003eCutting of the center plastic portion of the factory bumper cover is required to install the bumper\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eLighting \u0026amp; Winch Options\u003c\/p\u003e\n\n\u003cp\u003eLo Profile Fitment\u003c\/p\u003e\n\n\u003cp\u003eClevis Mounts for D-Rings\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eIncludes all Necessary Mounting Brackets \u0026amp; Hardware for Install\u003c\/p\u003e\n\n\u003cp\u003eBumper Weighs 75lbs\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eDesigned Specifically for the Baja Designs S8 30” Light Bar\u003c\/p\u003e\n\n\u003cp\u003eAlso compatible with the RIGID 30” SR Series and Extreme LED 30” 5D Light Bar\u003c\/p\u003e\n\n\u003cp\u003eFits Most Winches 8k-12k in Size. Winches with the ability to relocate control box recommended. Confirmed fitment on ComeUp, Smittybilt X20, Warn Zeon and VR series winches.\u003c\/p\u003e\n\n\u003cp\u003eWe Recommend Synthetic Rope Winches \u0026amp; Hawse Style Fairleads for Best Functionality\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432725672167,"sku":"1100-1114-30-NB","price":882.0,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/pacificupfitters.com\/collections\/c4-fabrication.oembed?page=23","provider":"Pacific Upfitters","version":"1.0","type":"link"}