{"title":"Rear Bumper","description":null,"products":[{"product_id":"4runner-overland-series-rear-bumper-5th-gen-2010-2024-dual-swing-arms-includes-tire-carrier-raw-unfinished","title":"4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024 | Dual Swing Arms (Includes Tire Carrier)  | Raw - Unfinished","description":"\u003cp\u003eBumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\u003c\/p\u003e\n\n\u003cp\u003eCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with 2021+ BSM\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with Parking Sensors on some Models\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\u003c\/p\u003e\n\n\u003cp\u003eMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\u003c\/p\u003e\n\n\u003cp\u003eDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\u003c\/p\u003e\n\n\u003cp\u003eAnti-Rattle, Heavy Duty Swing-Out Latching System\u003c\/p\u003e\n\n\u003cp\u003eSwing-Out fits up to a 35″ Tire.\u003c\/p\u003e\n\n\u003cp\u003eIncludes a license plate mount kit with light.\u003c\/p\u003e\n\n\u003cp\u003eRetains camera functionality.\u003c\/p\u003e\n\n\u003cp\u003eSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\u003c\/p\u003e\n\n\u003cp\u003eMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\u003c\/p\u003e\n\n\u003cp\u003eOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\u003c\/p\u003e\n\n\u003cp\u003eAll of our mounts can be adjusted vertically on our swing arms according to preference.\u003c\/p\u003e\n\n\u003cp\u003eOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\u003c\/p\u003e\n\n\u003cp\u003eBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\u003c\/p\u003e\n\n\u003cp\u003ePlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eOptional Rotopax Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Hi-Lift Jack Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Jerry Can Holder\u003c\/p\u003e\n\n\u003cp\u003eOptional Reverse Camera Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Ham Antenna Bracket\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432731177191,"sku":"1100-4110-DUAL","price":3988.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-overland-series-rear-bumper-5th-gen-2010-2024-dual-swing-arms-includes-tire-carrier-hammer-black-powder-coat","title":"4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024 | Dual Swing Arms (Includes Tire Carrier)  | Hammer Black Powder Coat","description":"\u003cp\u003eBumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\u003c\/p\u003e\n\n\u003cp\u003eCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with 2021+ BSM\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with Parking Sensors on some Models\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\u003c\/p\u003e\n\n\u003cp\u003eMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\u003c\/p\u003e\n\n\u003cp\u003eDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\u003c\/p\u003e\n\n\u003cp\u003eAnti-Rattle, Heavy Duty Swing-Out Latching System\u003c\/p\u003e\n\n\u003cp\u003eSwing-Out fits up to a 35″ Tire.\u003c\/p\u003e\n\n\u003cp\u003eIncludes a license plate mount kit with light.\u003c\/p\u003e\n\n\u003cp\u003eRetains camera functionality.\u003c\/p\u003e\n\n\u003cp\u003eSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\u003c\/p\u003e\n\n\u003cp\u003eMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\u003c\/p\u003e\n\n\u003cp\u003eOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\u003c\/p\u003e\n\n\u003cp\u003eAll of our mounts can be adjusted vertically on our swing arms according to preference.\u003c\/p\u003e\n\n\u003cp\u003eOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\u003c\/p\u003e\n\n\u003cp\u003eBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\u003c\/p\u003e\n\n\u003cp\u003ePlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eOptional Rotopax Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Hi-Lift Jack Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Jerry Can Holder\u003c\/p\u003e\n\n\u003cp\u003eOptional Reverse Camera Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Ham Antenna Bracket\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432731209959,"sku":"1100-4110-DUAL-01NA","price":4599.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-overland-series-rear-bumper-5th-gen-2010-2024-half-length-swing-arm-passenger-side-pivot-raw-unfinished","title":"4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024 | Half Length Swing Arm - Passenger side pivot | Raw - Unfinished","description":"\u003cp\u003eBumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\u003c\/p\u003e\n\n\u003cp\u003eCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with 2021+ BSM\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with Parking Sensors on some Models\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\u003c\/p\u003e\n\n\u003cp\u003eMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\u003c\/p\u003e\n\n\u003cp\u003eDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\u003c\/p\u003e\n\n\u003cp\u003eAnti-Rattle, Heavy Duty Swing-Out Latching System\u003c\/p\u003e\n\n\u003cp\u003eSwing-Out fits up to a 35″ Tire.\u003c\/p\u003e\n\n\u003cp\u003eIncludes a license plate mount kit with light.\u003c\/p\u003e\n\n\u003cp\u003eRetains camera functionality.\u003c\/p\u003e\n\n\u003cp\u003eSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\u003c\/p\u003e\n\n\u003cp\u003eMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\u003c\/p\u003e\n\n\u003cp\u003eOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\u003c\/p\u003e\n\n\u003cp\u003eAll of our mounts can be adjusted vertically on our swing arms according to preference.\u003c\/p\u003e\n\n\u003cp\u003eOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\u003c\/p\u003e\n\n\u003cp\u003eBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\u003c\/p\u003e\n\n\u003cp\u003ePlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eOptional Rotopax Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Hi-Lift Jack Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Jerry Can Holder\u003c\/p\u003e\n\n\u003cp\u003eOptional Reverse Camera Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Ham Antenna Bracket\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432731242727,"sku":"1100-4110-HALF","price":3423.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-overland-series-rear-bumper-5th-gen-2010-2024-half-length-swing-arm-passenger-side-pivot-hammer-black-powder-coat","title":"4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024 | Half Length Swing Arm - Passenger side pivot | Hammer Black Powder Coat","description":"\u003cp\u003eBumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\u003c\/p\u003e\n\n\u003cp\u003eCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with 2021+ BSM\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with Parking Sensors on some Models\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\u003c\/p\u003e\n\n\u003cp\u003eMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\u003c\/p\u003e\n\n\u003cp\u003eDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\u003c\/p\u003e\n\n\u003cp\u003eAnti-Rattle, Heavy Duty Swing-Out Latching System\u003c\/p\u003e\n\n\u003cp\u003eSwing-Out fits up to a 35″ Tire.\u003c\/p\u003e\n\n\u003cp\u003eIncludes a license plate mount kit with light.\u003c\/p\u003e\n\n\u003cp\u003eRetains camera functionality.\u003c\/p\u003e\n\n\u003cp\u003eSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\u003c\/p\u003e\n\n\u003cp\u003eMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\u003c\/p\u003e\n\n\u003cp\u003eOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\u003c\/p\u003e\n\n\u003cp\u003eAll of our mounts can be adjusted vertically on our swing arms according to preference.\u003c\/p\u003e\n\n\u003cp\u003eOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\u003c\/p\u003e\n\n\u003cp\u003eBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\u003c\/p\u003e\n\n\u003cp\u003ePlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eOptional Rotopax Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Hi-Lift Jack Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Jerry Can Holder\u003c\/p\u003e\n\n\u003cp\u003eOptional Reverse Camera Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Ham Antenna Bracket\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432731275495,"sku":"1100-4110-HALF-01NA","price":3859.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-overland-series-rear-bumper-5th-gen-2010-2024-none-swing-arms-cannot-be-added-later-raw-unfinished","title":"4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024 | None - Swing Arms CANNOT be added later | Raw - Unfinished","description":"\u003cp\u003eBumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\u003c\/p\u003e\n\n\u003cp\u003eCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with 2021+ BSM\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with Parking Sensors on some Models\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\u003c\/p\u003e\n\n\u003cp\u003eMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\u003c\/p\u003e\n\n\u003cp\u003eDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\u003c\/p\u003e\n\n\u003cp\u003eAnti-Rattle, Heavy Duty Swing-Out Latching System\u003c\/p\u003e\n\n\u003cp\u003eSwing-Out fits up to a 35″ Tire.\u003c\/p\u003e\n\n\u003cp\u003eIncludes a license plate mount kit with light.\u003c\/p\u003e\n\n\u003cp\u003eRetains camera functionality.\u003c\/p\u003e\n\n\u003cp\u003eSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\u003c\/p\u003e\n\n\u003cp\u003eMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\u003c\/p\u003e\n\n\u003cp\u003eOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\u003c\/p\u003e\n\n\u003cp\u003eAll of our mounts can be adjusted vertically on our swing arms according to preference.\u003c\/p\u003e\n\n\u003cp\u003eOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\u003c\/p\u003e\n\n\u003cp\u003eBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\u003c\/p\u003e\n\n\u003cp\u003ePlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eOptional Rotopax Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Hi-Lift Jack Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Jerry Can Holder\u003c\/p\u003e\n\n\u003cp\u003eOptional Reverse Camera Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Ham Antenna Bracket\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432731308263,"sku":"1100-4110-NS","price":2499.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-overland-series-rear-bumper-5th-gen-2010-2024-none-swing-arms-cannot-be-added-later-hammer-black-powder-coat","title":"4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024 | None - Swing Arms CANNOT be added later | Hammer Black Powder Coat","description":"\u003cp\u003eBumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\u003c\/p\u003e\n\n\u003cp\u003eCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with 2021+ BSM\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with Parking Sensors on some Models\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\u003c\/p\u003e\n\n\u003cp\u003eMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\u003c\/p\u003e\n\n\u003cp\u003eDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\u003c\/p\u003e\n\n\u003cp\u003eAnti-Rattle, Heavy Duty Swing-Out Latching System\u003c\/p\u003e\n\n\u003cp\u003eSwing-Out fits up to a 35″ Tire.\u003c\/p\u003e\n\n\u003cp\u003eIncludes a license plate mount kit with light.\u003c\/p\u003e\n\n\u003cp\u003eRetains camera functionality.\u003c\/p\u003e\n\n\u003cp\u003eSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\u003c\/p\u003e\n\n\u003cp\u003eMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\u003c\/p\u003e\n\n\u003cp\u003eOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\u003c\/p\u003e\n\n\u003cp\u003eAll of our mounts can be adjusted vertically on our swing arms according to preference.\u003c\/p\u003e\n\n\u003cp\u003eOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\u003c\/p\u003e\n\n\u003cp\u003eBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\u003c\/p\u003e\n\n\u003cp\u003ePlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eOptional Rotopax Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Hi-Lift Jack Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Jerry Can Holder\u003c\/p\u003e\n\n\u003cp\u003eOptional Reverse Camera Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Ham Antenna Bracket\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432731341031,"sku":"1100-4110-NS-01NA","price":2799.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-overland-series-rear-bumper-5th-gen-2010-2024-single-full-length-swing-arm-includes-tire-carrier-passenger-side-pivot-raw-unfinished","title":"4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024 | Single Full Length Swing Arm (Includes Tire Carrier) - Passenger side pivot | Raw - Unfinished","description":"\u003cp\u003eBumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\u003c\/p\u003e\n\n\u003cp\u003eCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with 2021+ BSM\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with Parking Sensors on some Models\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\u003c\/p\u003e\n\n\u003cp\u003eMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\u003c\/p\u003e\n\n\u003cp\u003eDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\u003c\/p\u003e\n\n\u003cp\u003eAnti-Rattle, Heavy Duty Swing-Out Latching System\u003c\/p\u003e\n\n\u003cp\u003eSwing-Out fits up to a 35″ Tire.\u003c\/p\u003e\n\n\u003cp\u003eIncludes a license plate mount kit with light.\u003c\/p\u003e\n\n\u003cp\u003eRetains camera functionality.\u003c\/p\u003e\n\n\u003cp\u003eSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\u003c\/p\u003e\n\n\u003cp\u003eMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\u003c\/p\u003e\n\n\u003cp\u003eOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\u003c\/p\u003e\n\n\u003cp\u003eAll of our mounts can be adjusted vertically on our swing arms according to preference.\u003c\/p\u003e\n\n\u003cp\u003eOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\u003c\/p\u003e\n\n\u003cp\u003eBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\u003c\/p\u003e\n\n\u003cp\u003ePlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eOptional Rotopax Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Hi-Lift Jack Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Jerry Can Holder\u003c\/p\u003e\n\n\u003cp\u003eOptional Reverse Camera Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Ham Antenna Bracket\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432731373799,"sku":"1100-4110-SINGLE-P","price":3598.0,"currency_code":"USD","in_stock":true}]},{"product_id":"4runner-overland-series-rear-bumper-5th-gen-2010-2024-single-full-length-swing-arm-includes-tire-carrier-passenger-side-pivot-hammer-black-powder-coat","title":"4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024 | Single Full Length Swing Arm (Includes Tire Carrier) - Passenger side pivot | Hammer Black Powder Coat","description":"\u003cp\u003eBumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\u003c\/p\u003e\n\n\u003cp\u003eCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with 2021+ BSM\u003c\/p\u003e\n\n\u003cp\u003eNOT Compatible with Parking Sensors on some Models\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\u003c\/p\u003e\n\n\u003cp\u003eMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\u003c\/p\u003e\n\n\u003cp\u003eDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\u003c\/p\u003e\n\n\u003cp\u003eAnti-Rattle, Heavy Duty Swing-Out Latching System\u003c\/p\u003e\n\n\u003cp\u003eSwing-Out fits up to a 35″ Tire.\u003c\/p\u003e\n\n\u003cp\u003eIncludes a license plate mount kit with light.\u003c\/p\u003e\n\n\u003cp\u003eRetains camera functionality.\u003c\/p\u003e\n\n\u003cp\u003eSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\u003c\/p\u003e\n\n\u003cp\u003eMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\u003c\/p\u003e\n\n\u003cp\u003eOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\u003c\/p\u003e\n\n\u003cp\u003eAll of our mounts can be adjusted vertically on our swing arms according to preference.\u003c\/p\u003e\n\n\u003cp\u003eOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\u003c\/p\u003e\n\n\u003cp\u003eBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\u003c\/p\u003e\n\n\u003cp\u003ePlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eOptional Rotopax Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Hi-Lift Jack Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Jerry Can Holder\u003c\/p\u003e\n\n\u003cp\u003eOptional Reverse Camera Mount\u003c\/p\u003e\n\n\u003cp\u003eOptional Ham Antenna Bracket\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432731439335,"sku":"1100-4110-SINGLE-P-01NA","price":3999.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-overland-rear-bumper-2nd-gen-2005-2015-raw-unfinished","title":"Tacoma Overland Rear Bumper \/ 2nd Gen \/ 2005-2015 | Raw - Unfinished","description":"\u003cp\u003eEasy installation, 100% bolt on, no cutting or welding required.\u003cbr\u003e\nIntegrated receiver hitch for maximum clearance.\u003cbr\u003e\nAllows for a much better departure angle because of the low profile design and integrated hitch.\u003cbr\u003e\nFlip up license plate bracket included for easy access to hitch and trailer plug.\u003cbr\u003e\nLED license plate light included.\u003cbr\u003e\nRecessed backup light cutouts standard. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003cbr\u003e\n3\/16\" steel shell, 1\/4\" steel mounting brackets and hitch, 3\/4\" thick D-Ring tabs fully welded front and back come standard.\u003cbr\u003e\nWeighs 100lbs.\u003cbr\u003e\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432738812135,"sku":"1200-4205","price":1649.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-overland-rear-bumper-2nd-gen-2005-2015-hammer-black-powder-coat","title":"Tacoma Overland Rear Bumper \/ 2nd Gen \/ 2005-2015 | Hammer Black Powder Coat","description":"\u003cp\u003eEasy installation, 100% bolt on, no cutting or welding required.\u003cbr\u003e\nIntegrated receiver hitch for maximum clearance.\u003cbr\u003e\nAllows for a much better departure angle because of the low profile design and integrated hitch.\u003cbr\u003e\nFlip up license plate bracket included for easy access to hitch and trailer plug.\u003cbr\u003e\nLED license plate light included.\u003cbr\u003e\nRecessed backup light cutouts standard. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003cbr\u003e\n3\/16\" steel shell, 1\/4\" steel mounting brackets and hitch, 3\/4\" thick D-Ring tabs fully welded front and back come standard.\u003cbr\u003e\nWeighs 100lbs.\u003cbr\u003e\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432738877671,"sku":"1200-4205-01NA","price":1859.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-overland-rear-bumper-3rd-gen-2016-2023-raw-unfinished","title":"Tacoma Overland Rear Bumper \/ 3rd Gen \/ 2016-2023 | Raw - Unfinished","description":"\u003cp\u003eEasy installation, 100% bolt on, no cutting or welding required.\u003cbr\u003e\nIntegrated receiver hitch for maximum clearance.\u003cbr\u003e\nAllows for a much better departure angle because of the low profile design and integrated hitch.\u003cbr\u003e\nNot compatible with BSM on newer Tacomas\u003cbr\u003e\nFlip up license plate bracket included for easy access to hitch and trailer plug.\u003cbr\u003e\nLED license plate light included.\u003cbr\u003e\nRecessed backup light cutouts standard. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003cbr\u003e\n3\/16\" steel shell, 1\/4\" steel mounting brackets and hitch, 3\/4\" thick D-Ring tabs fully welded front and back come standard.\u003cbr\u003e\nWeighs 100lbs.\u003cbr\u003e\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432738943207,"sku":"1200-4216","price":1649.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-overland-rear-bumper-3rd-gen-2016-2023-hammer-black-powder-coat","title":"Tacoma Overland Rear Bumper \/ 3rd Gen \/ 2016-2023 | Hammer Black Powder Coat","description":"\u003cp\u003eEasy installation, 100% bolt on, no cutting or welding required.\u003cbr\u003e\nIntegrated receiver hitch for maximum clearance.\u003cbr\u003e\nAllows for a much better departure angle because of the low profile design and integrated hitch.\u003cbr\u003e\nNot compatible with BSM on newer Tacomas\u003cbr\u003e\nFlip up license plate bracket included for easy access to hitch and trailer plug.\u003cbr\u003e\nLED license plate light included.\u003cbr\u003e\nRecessed backup light cutouts standard. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003cbr\u003e\n3\/16\" steel shell, 1\/4\" steel mounting brackets and hitch, 3\/4\" thick D-Ring tabs fully welded front and back come standard.\u003cbr\u003e\nWeighs 100lbs.\u003cbr\u003e\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432738975975,"sku":"1200-4216-01NA","price":1859.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-overland-series-high-clearance-rear-bumper-3rd-gen-2016-2023-no-swing-arms-swing-arms-cannot-be-added-later-no-side-tubes-raw-unfinished","title":"Tacoma Overland Series High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023 | No Swing Arms - SWING ARMS CANNOT BE ADDED LATER | No Side Tubes | Raw - Unfinished","description":"\u003cp\u003eThis bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\u003c\/p\u003e\n\n\u003cp\u003eLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\u003cbr\u003e\n3\/4” thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e\nComes standard with hidden hitch.\u003cbr\u003e\nLicense plate flips up for access to receiver hitch and trailer wiring connection.\u003cbr\u003e\nLicense plate light included.\u003cbr\u003e\nAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003cbr\u003e\nAftermarket rear suspension\/lift recommended but not required.\u003cbr\u003e\n150lbs without swing arm, 250lbs with swing arm and accessories.\u003cbr\u003e\nJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\u003cbr\u003e\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432739041511,"sku":"1200-4316-HC-NS","price":2399.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-overland-series-high-clearance-rear-bumper-3rd-gen-2016-2023-no-swing-arms-swing-arms-cannot-be-added-later-no-side-tubes-hammer-black-powder-coat","title":"Tacoma Overland Series High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023 | No Swing Arms - SWING ARMS CANNOT BE ADDED LATER | No Side Tubes | Hammer Black Powder Coat","description":"\u003cp\u003eThis bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\u003c\/p\u003e\n\n\u003cp\u003eLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\u003cbr\u003e\n3\/4” thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e\nComes standard with hidden hitch.\u003cbr\u003e\nLicense plate flips up for access to receiver hitch and trailer wiring connection.\u003cbr\u003e\nLicense plate light included.\u003cbr\u003e\nAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003cbr\u003e\nAftermarket rear suspension\/lift recommended but not required.\u003cbr\u003e\n150lbs without swing arm, 250lbs with swing arm and accessories.\u003cbr\u003e\nJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\u003cbr\u003e\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432739107047,"sku":"1200-4316-HC-NS-01NA","price":2699.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-overland-series-high-clearance-rear-bumper-3rd-gen-2016-2023-no-swing-arms-swing-arms-cannot-be-added-later-add-side-tubing-raw-unfinished","title":"Tacoma Overland Series High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023 | No Swing Arms - SWING ARMS CANNOT BE ADDED LATER | Add Side Tubing | Raw - Unfinished","description":"\u003cp\u003eThis bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\u003c\/p\u003e\n\n\u003cp\u003eLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\u003cbr\u003e\n3\/4” thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e\nComes standard with hidden hitch.\u003cbr\u003e\nLicense plate flips up for access to receiver hitch and trailer wiring connection.\u003cbr\u003e\nLicense plate light included.\u003cbr\u003e\nAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003cbr\u003e\nAftermarket rear suspension\/lift recommended but not required.\u003cbr\u003e\n150lbs without swing arm, 250lbs with swing arm and accessories.\u003cbr\u003e\nJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\u003cbr\u003e\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432739172583,"sku":"1200-4316-HC-NS-ST","price":2648.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-overland-series-high-clearance-rear-bumper-3rd-gen-2016-2023-no-swing-arms-swing-arms-cannot-be-added-later-add-side-tubing-hammer-black-powder-coat","title":"Tacoma Overland Series High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023 | No Swing Arms - SWING ARMS CANNOT BE ADDED LATER | Add Side Tubing | Hammer Black Powder Coat","description":"\u003cp\u003eThis bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\u003c\/p\u003e\n\n\u003cp\u003eLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\u003cbr\u003e\n3\/4” thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e\nComes standard with hidden hitch.\u003cbr\u003e\nLicense plate flips up for access to receiver hitch and trailer wiring connection.\u003cbr\u003e\nLicense plate light included.\u003cbr\u003e\nAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003cbr\u003e\nAftermarket rear suspension\/lift recommended but not required.\u003cbr\u003e\n150lbs without swing arm, 250lbs with swing arm and accessories.\u003cbr\u003e\nJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\u003cbr\u003e\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432739238119,"sku":"1200-4316-HC-NS-ST-01NA","price":2999.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-overland-series-high-clearance-rear-bumper-3rd-gen-2016-2023-single-full-length-swing-arm-with-tire-carrier-passenger-side-pivot-driver-side-latch-no-side-tubes-raw-unfinished","title":"Tacoma Overland Series High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023 | Single Full Length Swing Arm With Tire Carrier - Passenger Side Pivot \/ Driver Side Latch | No Side Tubes | Raw - Unfinished","description":"\u003cp\u003eThis bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\u003c\/p\u003e\n\n\u003cp\u003eLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\u003cbr\u003e\n3\/4” thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e\nComes standard with hidden hitch.\u003cbr\u003e\nLicense plate flips up for access to receiver hitch and trailer wiring connection.\u003cbr\u003e\nLicense plate light included.\u003cbr\u003e\nAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003cbr\u003e\nAftermarket rear suspension\/lift recommended but not required.\u003cbr\u003e\n150lbs without swing arm, 250lbs with swing arm and accessories.\u003cbr\u003e\nJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\u003cbr\u003e\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432739270887,"sku":"1200-4316-HC-Single-P","price":3398.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-overland-series-high-clearance-rear-bumper-3rd-gen-2016-2023-single-full-length-swing-arm-with-tire-carrier-passenger-side-pivot-driver-side-latch-no-side-tubes-hammer-black-powder-coat","title":"Tacoma Overland Series High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023 | Single Full Length Swing Arm With Tire Carrier - Passenger Side Pivot \/ Driver Side Latch | No Side Tubes | Hammer Black Powder Coat","description":"\u003cp\u003eThis bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\u003c\/p\u003e\n\n\u003cp\u003eLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\u003cbr\u003e\n3\/4” thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e\nComes standard with hidden hitch.\u003cbr\u003e\nLicense plate flips up for access to receiver hitch and trailer wiring connection.\u003cbr\u003e\nLicense plate light included.\u003cbr\u003e\nAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003cbr\u003e\nAftermarket rear suspension\/lift recommended but not required.\u003cbr\u003e\n150lbs without swing arm, 250lbs with swing arm and accessories.\u003cbr\u003e\nJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\u003cbr\u003e\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432739336423,"sku":"1200-4316-HC-Single-P-01NA","price":3799.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-overland-series-high-clearance-rear-bumper-3rd-gen-2016-2023-single-full-length-swing-arm-with-tire-carrier-passenger-side-pivot-driver-side-latch-add-side-tubing-raw-unfinished","title":"Tacoma Overland Series High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023 | Single Full Length Swing Arm With Tire Carrier - Passenger Side Pivot \/ Driver Side Latch | Add Side Tubing | Raw - Unfinished","description":"\u003cp\u003eThis bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\u003c\/p\u003e\n\n\u003cp\u003eLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\u003cbr\u003e\n3\/4” thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e\nComes standard with hidden hitch.\u003cbr\u003e\nLicense plate flips up for access to receiver hitch and trailer wiring connection.\u003cbr\u003e\nLicense plate light included.\u003cbr\u003e\nAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003cbr\u003e\nAftermarket rear suspension\/lift recommended but not required.\u003cbr\u003e\n150lbs without swing arm, 250lbs with swing arm and accessories.\u003cbr\u003e\nJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\u003cbr\u003e\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432739401959,"sku":"1200-4316-HC-Single-P-ST","price":3647.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-overland-series-high-clearance-rear-bumper-3rd-gen-2016-2023-single-full-length-swing-arm-with-tire-carrier-passenger-side-pivot-driver-side-latch-add-side-tubing-hammer-black-powder-coat","title":"Tacoma Overland Series High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023 | Single Full Length Swing Arm With Tire Carrier - Passenger Side Pivot \/ Driver Side Latch | Add Side Tubing | Hammer Black Powder Coat","description":"\u003cp\u003eThis bumper requires cutting of the side panels; Professional installation is recommended but not required. Blind spot monitoring system is not supported with this bumper.\u003c\/p\u003e\n\n\u003cp\u003eLower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.\u003cbr\u003e\n3\/4” thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e\nComes standard with hidden hitch.\u003cbr\u003e\nLicense plate flips up for access to receiver hitch and trailer wiring connection.\u003cbr\u003e\nLicense plate light included.\u003cbr\u003e\nAll Tacoma rear bumpers come with the reverse light cutouts. Cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount.\u003cbr\u003e\nAftermarket rear suspension\/lift recommended but not required.\u003cbr\u003e\n150lbs without swing arm, 250lbs with swing arm and accessories.\u003cbr\u003e\nJerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.\u003cbr\u003e\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432739467495,"sku":"1200-4316-HC-Single-P-ST-01NA","price":3999.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-rock-runner-high-clearance-rear-bumper-3rd-gen-2016-2023-double-tube-sides-raw-unfinished","title":"Tacoma Rock Runner High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023 | Double Tube Sides | Raw - Unfinished","description":"\u003cp\u003eFitment:\u003c\/p\u003e\n\n\u003cp\u003eBlind spot monitoring and parking sensors are NOT supported by this bumper\u003c\/p\u003e\n\n\u003cp\u003eThis bumper requires cutting of the rear side body panels\u003c\/p\u003e\n\n\u003cp\u003eProfessional installation is recommended but not required.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eModular, 3 piece design with bolt-on bumper sides\u003c\/p\u003e\n\n\u003cp\u003eHidden hitch that does not interfere with ground clearance\u003c\/p\u003e\n\n\u003cp\u003eFlip up license plate to access receiver hitch and trailer wiring connection\u003c\/p\u003e\n\n\u003cp\u003eIncluded license plate light\u003c\/p\u003e\n\n\u003cp\u003e¾” Thick D-Ring clevis mounts provide recovery options\u003c\/p\u003e\n\n\u003cp\u003eWeight: Rear w\/ Plate Sides: 84 lbs, Rear w\/ Double Tube Sides: 88 lbs, Rear w\/ Single Tube Sides: 80 lbs\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eDual mounting points for Baja Design S1 pod lights\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432739533031,"sku":"1200-4516-DT","price":1499.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-rock-runner-high-clearance-rear-bumper-3rd-gen-2016-2023-double-tube-sides-hammer-black-powder-coat","title":"Tacoma Rock Runner High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023 | Double Tube Sides | Hammer Black Powder Coat","description":"\u003cp\u003eFitment:\u003c\/p\u003e\n\n\u003cp\u003eBlind spot monitoring and parking sensors are NOT supported by this bumper\u003c\/p\u003e\n\n\u003cp\u003eThis bumper requires cutting of the rear side body panels\u003c\/p\u003e\n\n\u003cp\u003eProfessional installation is recommended but not required.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eModular, 3 piece design with bolt-on bumper sides\u003c\/p\u003e\n\n\u003cp\u003eHidden hitch that does not interfere with ground clearance\u003c\/p\u003e\n\n\u003cp\u003eFlip up license plate to access receiver hitch and trailer wiring connection\u003c\/p\u003e\n\n\u003cp\u003eIncluded license plate light\u003c\/p\u003e\n\n\u003cp\u003e¾” Thick D-Ring clevis mounts provide recovery options\u003c\/p\u003e\n\n\u003cp\u003eWeight: Rear w\/ Plate Sides: 84 lbs, Rear w\/ Double Tube Sides: 88 lbs, Rear w\/ Single Tube Sides: 80 lbs\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eDual mounting points for Baja Design S1 pod lights\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432739565799,"sku":"1200-4516-DT-01NA","price":1699.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-rock-runner-high-clearance-rear-bumper-3rd-gen-2016-2023-wide-double-tube-for-fiber-glass-raw-unfinished","title":"Tacoma Rock Runner High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023 | Wide Double Tube (for fiber glass) | Raw - Unfinished","description":"\u003cp\u003eFitment:\u003c\/p\u003e\n\n\u003cp\u003eBlind spot monitoring and parking sensors are NOT supported by this bumper\u003c\/p\u003e\n\n\u003cp\u003eThis bumper requires cutting of the rear side body panels\u003c\/p\u003e\n\n\u003cp\u003eProfessional installation is recommended but not required.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eModular, 3 piece design with bolt-on bumper sides\u003c\/p\u003e\n\n\u003cp\u003eHidden hitch that does not interfere with ground clearance\u003c\/p\u003e\n\n\u003cp\u003eFlip up license plate to access receiver hitch and trailer wiring connection\u003c\/p\u003e\n\n\u003cp\u003eIncluded license plate light\u003c\/p\u003e\n\n\u003cp\u003e¾” Thick D-Ring clevis mounts provide recovery options\u003c\/p\u003e\n\n\u003cp\u003eWeight: Rear w\/ Plate Sides: 84 lbs, Rear w\/ Double Tube Sides: 88 lbs, Rear w\/ Single Tube Sides: 80 lbs\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eDual mounting points for Baja Design S1 pod lights\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432739631335,"sku":"1200-4516-DT-W","price":1549.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-rock-runner-high-clearance-rear-bumper-3rd-gen-2016-2023-wide-double-tube-for-fiber-glass-hammer-black-powder-coat","title":"Tacoma Rock Runner High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023 | Wide Double Tube (for fiber glass) | Hammer Black Powder Coat","description":"\u003cp\u003eFitment:\u003c\/p\u003e\n\n\u003cp\u003eBlind spot monitoring and parking sensors are NOT supported by this bumper\u003c\/p\u003e\n\n\u003cp\u003eThis bumper requires cutting of the rear side body panels\u003c\/p\u003e\n\n\u003cp\u003eProfessional installation is recommended but not required.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eModular, 3 piece design with bolt-on bumper sides\u003c\/p\u003e\n\n\u003cp\u003eHidden hitch that does not interfere with ground clearance\u003c\/p\u003e\n\n\u003cp\u003eFlip up license plate to access receiver hitch and trailer wiring connection\u003c\/p\u003e\n\n\u003cp\u003eIncluded license plate light\u003c\/p\u003e\n\n\u003cp\u003e¾” Thick D-Ring clevis mounts provide recovery options\u003c\/p\u003e\n\n\u003cp\u003eWeight: Rear w\/ Plate Sides: 84 lbs, Rear w\/ Double Tube Sides: 88 lbs, Rear w\/ Single Tube Sides: 80 lbs\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eDual mounting points for Baja Design S1 pod lights\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432739696871,"sku":"1200-4516-DT-W-01NA","price":1759.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-rock-runner-high-clearance-rear-bumper-3rd-gen-2016-2023-plate-sides-raw-unfinished","title":"Tacoma Rock Runner High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023 | Plate Sides | Raw - Unfinished","description":"\u003cp\u003eFitment:\u003c\/p\u003e\n\n\u003cp\u003eBlind spot monitoring and parking sensors are NOT supported by this bumper\u003c\/p\u003e\n\n\u003cp\u003eThis bumper requires cutting of the rear side body panels\u003c\/p\u003e\n\n\u003cp\u003eProfessional installation is recommended but not required.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eModular, 3 piece design with bolt-on bumper sides\u003c\/p\u003e\n\n\u003cp\u003eHidden hitch that does not interfere with ground clearance\u003c\/p\u003e\n\n\u003cp\u003eFlip up license plate to access receiver hitch and trailer wiring connection\u003c\/p\u003e\n\n\u003cp\u003eIncluded license plate light\u003c\/p\u003e\n\n\u003cp\u003e¾” Thick D-Ring clevis mounts provide recovery options\u003c\/p\u003e\n\n\u003cp\u003eWeight: Rear w\/ Plate Sides: 84 lbs, Rear w\/ Double Tube Sides: 88 lbs, Rear w\/ Single Tube Sides: 80 lbs\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eDual mounting points for Baja Design S1 pod lights\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432739729639,"sku":"1200-4516-P","price":1499.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-rock-runner-high-clearance-rear-bumper-3rd-gen-2016-2023-plate-sides-hammer-black-powder-coat","title":"Tacoma Rock Runner High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023 | Plate Sides | Hammer Black Powder Coat","description":"\u003cp\u003eFitment:\u003c\/p\u003e\n\n\u003cp\u003eBlind spot monitoring and parking sensors are NOT supported by this bumper\u003c\/p\u003e\n\n\u003cp\u003eThis bumper requires cutting of the rear side body panels\u003c\/p\u003e\n\n\u003cp\u003eProfessional installation is recommended but not required.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eModular, 3 piece design with bolt-on bumper sides\u003c\/p\u003e\n\n\u003cp\u003eHidden hitch that does not interfere with ground clearance\u003c\/p\u003e\n\n\u003cp\u003eFlip up license plate to access receiver hitch and trailer wiring connection\u003c\/p\u003e\n\n\u003cp\u003eIncluded license plate light\u003c\/p\u003e\n\n\u003cp\u003e¾” Thick D-Ring clevis mounts provide recovery options\u003c\/p\u003e\n\n\u003cp\u003eWeight: Rear w\/ Plate Sides: 84 lbs, Rear w\/ Double Tube Sides: 88 lbs, Rear w\/ Single Tube Sides: 80 lbs\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eDual mounting points for Baja Design S1 pod lights\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432739795175,"sku":"1200-4516-P-01NA","price":1699.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-rock-runner-high-clearance-rear-bumper-3rd-gen-2016-2023-single-tube-sides-raw-unfinished","title":"Tacoma Rock Runner High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023 | Single Tube Sides | Raw - Unfinished","description":"\u003cp\u003eFitment:\u003c\/p\u003e\n\n\u003cp\u003eBlind spot monitoring and parking sensors are NOT supported by this bumper\u003c\/p\u003e\n\n\u003cp\u003eThis bumper requires cutting of the rear side body panels\u003c\/p\u003e\n\n\u003cp\u003eProfessional installation is recommended but not required.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eModular, 3 piece design with bolt-on bumper sides\u003c\/p\u003e\n\n\u003cp\u003eHidden hitch that does not interfere with ground clearance\u003c\/p\u003e\n\n\u003cp\u003eFlip up license plate to access receiver hitch and trailer wiring connection\u003c\/p\u003e\n\n\u003cp\u003eIncluded license plate light\u003c\/p\u003e\n\n\u003cp\u003e¾” Thick D-Ring clevis mounts provide recovery options\u003c\/p\u003e\n\n\u003cp\u003eWeight: Rear w\/ Plate Sides: 84 lbs, Rear w\/ Double Tube Sides: 88 lbs, Rear w\/ Single Tube Sides: 80 lbs\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eDual mounting points for Baja Design S1 pod lights\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432739926247,"sku":"1200-4516-ST","price":1399.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tacoma-rock-runner-high-clearance-rear-bumper-3rd-gen-2016-2023-single-tube-sides-hammer-black-powder-coat","title":"Tacoma Rock Runner High Clearance  Rear Bumper \/ 3rd Gen \/ 2016-2023 | Single Tube Sides | Hammer Black Powder Coat","description":"\u003cp\u003eFitment:\u003c\/p\u003e\n\n\u003cp\u003eBlind spot monitoring and parking sensors are NOT supported by this bumper\u003c\/p\u003e\n\n\u003cp\u003eThis bumper requires cutting of the rear side body panels\u003c\/p\u003e\n\n\u003cp\u003eProfessional installation is recommended but not required.\u003c\/p\u003e\n\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\n\u003cp\u003eModular, 3 piece design with bolt-on bumper sides\u003c\/p\u003e\n\n\u003cp\u003eHidden hitch that does not interfere with ground clearance\u003c\/p\u003e\n\n\u003cp\u003eFlip up license plate to access receiver hitch and trailer wiring connection\u003c\/p\u003e\n\n\u003cp\u003eIncluded license plate light\u003c\/p\u003e\n\n\u003cp\u003e¾” Thick D-Ring clevis mounts provide recovery options\u003c\/p\u003e\n\n\u003cp\u003eWeight: Rear w\/ Plate Sides: 84 lbs, Rear w\/ Double Tube Sides: 88 lbs, Rear w\/ Single Tube Sides: 80 lbs\u003c\/p\u003e\n\n\u003cp\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\n\u003cp\u003eAdd-Ons:\u003c\/p\u003e\n\n\u003cp\u003eDual mounting points for Baja Design S1 pod lights\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432739991783,"sku":"1200-4516-ST-01NA","price":1599.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tundra-overland-series-rear-bumper-2nd-gen-2014-2021-raw-unfinished","title":"Tundra Overland Series Rear Bumper \/ 2nd Gen \/ 2014-2021 | Raw - Unfinished","description":"Main bumper structure made from 3\/16″ P\u0026amp;O steel.\nBumper mounting plates and brackets made from 1\/4″ P\u0026amp;O steel.\nAll bumpers come with 3\/4″ thick D-Ring shackles fully welded inside and outside of the bumper.\nBumper fits around OE tow hitch so that tow rating is not affected.\nOE hitch is not required to install bumper. Bumper can be installed without hitch in place if desired.\nAll bumpers are now compatible with factory BSM. Every bumper WILL SHIP with holes cut for bsm and plastic cover plates.\nAll rear bumpers come with backup light cutouts made to fit Baja Designs S2 flush mount, RIGID 2×3 SRM flush mount or Extreme LED 2×3 flush mount.\nBumper DOES work with backup\/park sensors.\nLicense plate light included with bumper.\nTrailer wiring plug-in mounts next to license plate for easy access.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432751788263,"sku":"1400-4214","price":1799.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tundra-overland-series-rear-bumper-2nd-gen-2014-2021-hammer-black-powder-coat","title":"Tundra Overland Series Rear Bumper \/ 2nd Gen \/ 2014-2021 | Hammer Black Powder Coat","description":"Main bumper structure made from 3\/16″ P\u0026amp;O steel.\nBumper mounting plates and brackets made from 1\/4″ P\u0026amp;O steel.\nAll bumpers come with 3\/4″ thick D-Ring shackles fully welded inside and outside of the bumper.\nBumper fits around OE tow hitch so that tow rating is not affected.\nOE hitch is not required to install bumper. Bumper can be installed without hitch in place if desired.\nAll bumpers are now compatible with factory BSM. Every bumper WILL SHIP with holes cut for bsm and plastic cover plates.\nAll rear bumpers come with backup light cutouts made to fit Baja Designs S2 flush mount, RIGID 2×3 SRM flush mount or Extreme LED 2×3 flush mount.\nBumper DOES work with backup\/park sensors.\nLicense plate light included with bumper.\nTrailer wiring plug-in mounts next to license plate for easy access.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432751821031,"sku":"1400-4214-01NA","price":1999.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tundra-overland-series-rear-bumper-3rd-gen-2022-raw-unfinished","title":"Tundra Overland Series Rear Bumper \/ 3rd Gen \/ 2022+ | Raw - Unfinished","description":"Main bumper structure made from 3\/16″ P\u0026amp;O steel.\nBumper retains BSM (blind spot monitoring) functionality.\nBumper retains parking sensors.\nBumper requires cutting of the factory plastic bumper corners.\nBumper mounting plates and brackets made from 1\/4″ P\u0026amp;O steel.\nAll bumpers come with 3\/4″ thick D-Ring shackles fully welded inside and outside of the bumper.\nBumper fits around OE hitch receiver so the official tow rating is retained.\nOE hitch receiver is not required to install bumper. Bumper can be installed without hitch in place to maximize ground clearance and departure angle.\nAll rear bumpers come with supplied reverse lights that will replace factory reverse lights\nAll rear bumpers come with backup light cutouts made to fit Baja Designs S2 flush mount, RIGID 2×3 SRM flush mount or Extreme LED 2×3 flush mount.\nLicense plate light included with bumper.\nTrailer wiring plug-in mounts next to license plate for easy access.\nWeight: 151 lbs\nNOT compatible with power rear bed step (must be relocated or removed)\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432751853799,"sku":"1400-4222","price":1999.0,"currency_code":"USD","in_stock":true}]},{"product_id":"tundra-overland-series-rear-bumper-3rd-gen-2022-hammer-black-powder-coat","title":"Tundra Overland Series Rear Bumper \/ 3rd Gen \/ 2022+ | Hammer Black Powder Coat","description":"Main bumper structure made from 3\/16″ P\u0026amp;O steel.\nBumper retains BSM (blind spot monitoring) functionality.\nBumper retains parking sensors.\nBumper requires cutting of the factory plastic bumper corners.\nBumper mounting plates and brackets made from 1\/4″ P\u0026amp;O steel.\nAll bumpers come with 3\/4″ thick D-Ring shackles fully welded inside and outside of the bumper.\nBumper fits around OE hitch receiver so the official tow rating is retained.\nOE hitch receiver is not required to install bumper. Bumper can be installed without hitch in place to maximize ground clearance and departure angle.\nAll rear bumpers come with supplied reverse lights that will replace factory reverse lights\nAll rear bumpers come with backup light cutouts made to fit Baja Designs S2 flush mount, RIGID 2×3 SRM flush mount or Extreme LED 2×3 flush mount.\nLicense plate light included with bumper.\nTrailer wiring plug-in mounts next to license plate for easy access.\nWeight: 151 lbs\nNOT compatible with power rear bed step (must be relocated or removed)\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":52432751886567,"sku":"1400-4222-01NA","price":2259.0,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/pacificupfitters.com\/collections\/rear-bumper.oembed","provider":"Pacific Upfitters","version":"1.0","type":"link"}