Dirt King LT Trail Runner Elite Kit | 05-15 Tacoma

Dirt King LT Trail Runner Kit for Toyota Tacoma widens track by 2 inches per side and boosts suspension travel over 30 % for enhanced off-road capability while maintaining on-road comfort and stock fender compatibility.

Upgrade your off-road experience with the Dirt King LT Trail Runner Kit, a comprehensive solution for transforming your vehicle into a high-performance off-road machine while maintaining on-road comfort and reliability. This expertly designed system optimizes suspension travel, tire clearance, and durability with precision-engineered components tailored for the Toyota Tacoma. This kit adds 2” of width per side, allowing for more than a 30% increase in suspension travel while still being compatible with stock fenders. Check out the "what's included" tab for more information on all the products included in this kit.

• Welding required for the shock relocation kit, spindle gussets, body mount relocation, double shear kit, and the alignment cam gussets.
• Not compatible with the factory sway bar.
• Rear suspension must be cycled to full compression to setup the lower shock mounts.
• Install by experienced fabricator is recommended.
• This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.

Features

• 2” Wider Per Side: Adds 2” of width per side, boosting suspension travel by 25%.
• Stock Fender Compatibility: Works with stock fenders when using positive offset wheels.
• Aggressive Look Option: Supports zero or negative offset wheels with flared fenders.
• Extended Wheelbase: Allows proper fitment of 35” tires.
• SilentSpin Bushings: Greaseless bushings in upper control arms for low maintenance.
• Delrin Bushings with PTFE: Smooth operation in lower control arms with PTFE-infused Delrin.
• Heavy-Duty Moog Ball Joints: Reliable outer pivots with heavy-duty Moog ball joints.
• Aluminum Skid Plates: Replaceable skid plates protect lower arms on rough trails.
• Flexible Installation: Compatible with coilovers, coilovers with bypasses, or coilovers with bump stops.
• Aluminum Strike Pads: Designed for optimal bump stop engagement.
• Complete Hardware Included: Comes with all necessary mounting hardware.
• Made in the USA: Proudly designed and manufactured in the United States.

What's Included

• +2" Long Travel Kit: Enhances off-road performance with an additional 2" width per side, supporting 35" tires and increasing suspension travel by over 25%.
• Alignment Cam Gussets: Reinforced chromoly plates prevent alignment issues caused by bent factory cam tabs, ensuring long-lasting stability.
• Upper Arm Double Shear Kit: The upper arm double shear kit strengthens the coil bucket to the frame and reduces stress on the upper arm bolts.
• Body Mount Relocation: Maximizes tire clearance, eliminating restrictions from stock mounts and enabling proper fitment of 35” tires.
• +2" Long Travel Spec King Coilovers: Custom-tuned King Spec coilovers to deliver superior performance for both off-road adventures and daily drivability.
• King 2.5 x 12 Smooth Body Shocks | Remote Reservoir: These rear shocks are specifically designed to optimize off-road performance without compromising on-road handling.
• Shock Relocation Kit: Increases shock stroke by 50%, improving articulation and maximizing rear suspension travel.
• 1" Differential Drop Kit (4WD): Lowers the front differential by 1", reducing CV angles to protect drivetrain components on lifted vehicles or those with long-travel suspensions.
• Shackle & Hanger Kit: Enhances geometry and strength, achieving 13" of travel with leaf springs while resisting deflection under heavy loads.
• Deaver U402 Springs & Hardware: A higher leaf count spring allows the use of thinner leaf material that yields a more flexible progressive leaf stack, or pyramid, producing a much smoother spring rate curve throughout the complete suspension cycle.
• Axle Assemblies (4WD)
• Forged 1.5" Wheel Spacers
• All Necessary Mounting Hardware
• Dirt King Sticker Pack
• Installation Instructions

Specifications

• Front Wheel Travel: Up to 11.5"
• Rear Wheel Travel: Up to 13"
• Amount of Lift: 0-3.5”
• Track Width: 2” wider per side
• Maximum Tire Size: 35”
• Maximum Backspacing: 4.75”
• Minimum Rim Size: 16”
• Coilover Shock Size: Dirt King Spec Coilovers
• Bump Stop Size: 2.0” x 2.0”

4WD
Shocks

Compatibility

Year Range: 05-15 Tacoma

Fitment Notes

Welding required for the shock relocation kit, spindle gussets, body mount relocation, double shear kit, and the alignment cam gussets.
Not compatible with the factory sway bar.
Rear suspension must be cycled to full compression to setup the lower shock mounts.
Install by experienced fabricator is recommended.
This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.