Standard Grade Universal Catalytic Converter - 2.00in.

Standard Grade Universal Catalytic Converter - 2.00in.

MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 93504 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

This Part Fits:

Year	Make	Model	Submodel	Notes
1986	Ford	Aerostar		Front and Rear; Cutting and Welding Required During Installation,Front and Rear; Cutting and Welding Required During Installation
1987	Ford	Aerostar		Front and Rear; Cutting and Welding Required During Installation,Front and Rear; Cutting and Welding Required During Installation
1992	Ford	Crown Victoria		Cutting and Welding Required During Installation,Cutting and Welding Required During Installation,Cutting and Welding Required During Installation
1993	Ford	Crown Victoria		Cutting and Welding Required During Installation,Cutting and Welding Required During Installation,Cutting and Welding Required During Installation
1994	Ford	Crown Victoria		Cutting and Welding Required During Installation,Cutting and Welding Required During Installation,Cutting and Welding Required During Installation
1989	Ford	Taurus		Cutting and Welding Required During Installation; Main and Pre-Converter,Cutting and Welding Required During Installation; Main and Pre-Converter
1990	Ford	Taurus		Cutting and Welding Required During Installation; Main and Pre-Converter,Cutting and Welding Required During Installation; Main and Pre-Converter
1988	Lincoln	Continental		Cutting and Welding Required During Installation; Main and Pre-Converter,Cutting and Welding Required During Installation; Main and Pre-Converter,Cutting and Welding Required During Installation; Main and Pre-Converter
1989	Lincoln	Continental		Cutting and Welding Required During Installation; Main and Pre-Converter,Cutting and Welding Required During Installation; Main and Pre-Converter,Cutting and Welding Required During Installation; Main and Pre-Converter
1990	Lincoln	Continental		Cutting and Welding Required During Installation; Main and Pre-Converter,Cutting and Welding Required During Installation; Main and Pre-Converter,Cutting and Welding Required During Installation; Main and Pre-Converter
1991	Lincoln	Town Car		Cutting and Welding Required During Installation,Cutting and Welding Required During Installation,Cutting and Welding Required During Installation,Cutting and Welding Required During Installation
1992	Lincoln	Town Car		Cutting and Welding Required During Installation,Cutting and Welding Required During Installation,Cutting and Welding Required During Installation,Cutting and Welding Required During Installation
1993	Lincoln	Town Car		Cutting and Welding Required During Installation,Cutting and Welding Required During Installation,Cutting and Welding Required During Installation,Cutting and Welding Required During Installation
1994	Lincoln	Town Car		Cutting and Welding Required During Installation,Cutting and Welding Required During Installation,Cutting and Welding Required During Installation,Cutting and Welding Required During Installation
1980	Mercedes-Benz	280CE		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1981	Mercedes-Benz	280CE		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1980	Mercedes-Benz	280E		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1981	Mercedes-Benz	280E		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1984	Mercedes-Benz	380SE		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1985	Mercedes-Benz	380SE		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1982	Mercedes-Benz	380SEC		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1983	Mercedes-Benz	380SEC		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1981	Mercedes-Benz	380SEL		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1982	Mercedes-Benz	380SEL		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1983	Mercedes-Benz	380SEL		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1981	Mercedes-Benz	380SL		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1982	Mercedes-Benz	380SL		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1983	Mercedes-Benz	380SL		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1984	Mercedes-Benz	380SL		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1985	Mercedes-Benz	380SL		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1992	Mercury	Grand Marquis		Cutting and Welding Required During Installation,Cutting and Welding Required During Installation,Cutting and Welding Required During Installation
1993	Mercury	Grand Marquis		Cutting and Welding Required During Installation,Cutting and Welding Required During Installation,Cutting and Welding Required During Installation
1994	Mercury	Grand Marquis		Cutting and Welding Required During Installation,Cutting and Welding Required During Installation,Cutting and Welding Required During Installation
1989	Mercury	Sable		Cutting and Welding Required During Installation; Main and Pre-Converter,Cutting and Welding Required During Installation; Main and Pre-Converter
1990	Mercury	Sable		Cutting and Welding Required During Installation; Main and Pre-Converter,Cutting and Welding Required During Installation; Main and Pre-Converter
1988	Merkur	Scorpio		Front and Rear; Cutting and Welding Required During Installation,Front and Rear; Cutting and Welding Required During Installation
1989	Merkur	Scorpio		Front and Rear; Cutting and Welding Required During Installation,Front and Rear; Cutting and Welding Required During Installation
1983	Mitsubishi	Cordia		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1984	Mitsubishi	Cordia		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1985	Mitsubishi	Cordia		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1986	Mitsubishi	Cordia		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1987	Mitsubishi	Cordia		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1988	Mitsubishi	Cordia		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1983	Mitsubishi	Starion		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1984	Mitsubishi	Starion		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1985	Mitsubishi	Starion		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1986	Mitsubishi	Starion		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1987	Mitsubishi	Starion		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1988	Mitsubishi	Starion		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1989	Mitsubishi	Starion		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1984	Mitsubishi	Tredia		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1985	Mitsubishi	Tredia		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1986	Mitsubishi	Tredia		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1987	Mitsubishi	Tredia		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation
1988	Mitsubishi	Tredia		Main and Pre-Converter; Cutting and Welding Required During Installation,Main and Pre-Converter; Cutting and Welding Required During Installation

Specifications:

Description_DES	Standard Grade Universal Catalytic Converter - 2.00in.
Description_UNS	25173701
Description_EXT	Universal Catalytic Converter - 2.00in.
Description_MKT	MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 93504 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Description_DEF	Catalytic Converter
Description_ABR	CatConverter
Description_SHO	Standard Grade
Description_INV	Catalytic Converter
Description_ASC	MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 93504 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Description_KEY	Exhaust,MagnaFlow,Catalytic Convertor,Cadillac Convertor,Convertor,Emissions
Description_LAB	Catalytic Converter